The Oracle Solaris OS Installation Worksheet

Use the worksheet to gather the information you need to configure the factory-installed Oracle Solaris 10 OS. You need to collect only the information that applies to your application.

Information for Installation		Description or Example	Your Answers: Defaults are noted with an asterisk (*).
Language		Choose from the list of available languages for the Oracle Solaris 10 software.	English*
Locale		Choose your geographic region from the list of available locales.	English (C - 7-bit ASCII)*
Terminal		Choose the type of terminal that you are using from the list of available terminal types.
Network connection		Is the system connected to a network?	Networked Non-networked*
DHCP		Can the system use Dynamic Host Configuration Protocol (DHCP) to configure its network interfaces?	Yes No*
If you are not using DHCP, note the network address:	IP address	If you are not using DHCP, supply the IP address for the system. Example: `129.200.9.1`
	Subnet	If you are not using DHCP, is the system part of a subnet? If yes, what is the netmask of the subnet? Example: `255.255.0.0`	255.255.0.0*
	IPv6	Do you want to enable IPv6 on this machine?	Yes No*
Host name		A host name that you choose for the system.
Kerberos		Do you want to configure Kerberos security on this machine? If yes, gather the following information: Default Realm: Administration Server: First KDC: (Optional) Additional KDCs:	Yes No*
Name service: If the system uses a name service, provide the following information.	Name service	Which name service should this system use?	NIS+ NIS DNS LDAP None*
	Domain name	Provide the name of the domain in which the system resides.
	NIS+ and NIS	Do you want to specify a name server or let the installation program find one?	Specify One Find One*
	DNS	Provide IP addresses for the DNS server. You must enter at least one IP address, but you can enter up to three addresses. You can also enter a list of domains to search when a DNS query is made. Search Domain: Search Domain: Search Domain:
	LDAP	Provide the following information about your LDAP profile: Profile name: Profile server: If you specify a proxy credential level in your LDAP profile, gather this information: Proxy-Bind Distinguished Name: Proxy-Bind Password:
Default route		Do you want to specify a default route IP address or let the Oracle Solaris OS installation program find one? The default route provides a bridge that forwards traffic between two physical networks. An IP address is a unique number that identifies each host on a network. You have the following choices: You can specify the IP address. An `/etc/defaultrouter` file is created with the specified IP address. When the system is rebooted, the specified IP address becomes the default route. You can let the Oracle Solaris OS installation program detect an IP address. However, the system must be on a subnet that has a router that advertises itself by using the ICMP router discovery protocol. If you are using the command-line interface, the software detects an IP address when the system is booted. You can select None if you do not have a router or do not want the software to detect an IP address at this time. The software automatically tries to detect an IP address on reboot.	Specify One Detect One None*
Time zone		How do you want to specify your default time zone?	Geographic region* Offset from GM Time zone file
Root password		Choose a root password for the system.

Skip Navigation Links
Exit Print View
	Sun Fire X2270 M2 Server Product Documentation