| Skip Navigation Links | |
| Exit Print View | |
|
Sun Netra 6000 Modular System HTML Document Collection |
Preparing Your Site Before the System Arrives
Location Restrictions for DC Models
Determining DC Power Requirements
Weight and Size Specifications for Moving and Lifting
Preparing to Install the Modular System
Gather Required Tools and Equipment
Installing the Chassis Into Your Rack
Mounting the Chassis in a Rack
Connecting To and Powering On the Modular System
Role of Oracle ILOM During Installation
Connecting Data and Management Cables
Powering On the Modular System
Log Into the CMM Through the SER MGT Port
Configure the CMM NET MGT Port With a Static IP Address
Configure the IP Addresses Using Your DHCP Server
Identify the IP and MAC Addresses
Log Into the CMM Through the NET MGT Port
Change the CMM ILOM root Account Password
Installing Shipping Brackets on a Sun Rack 1000
Understanding Oracle ILOM on the Modular System
Oracle ILOM 3.0 Features Specific to the Modular System
Logging Into and Out of CMM ILOM
Performing Common CMM ILOM Configuration Tasks
Viewing and Configuring IP and MAC Addresses
Administering the Modular System (CMM ILOM)
Managing the Chassis Using the CLI
Accessing Server Modules (CMM ILOM)
Identifying SNMP Trap and PET Event Messages
Understanding Fault Management
Monitoring Faults (Oracle ILOM)
Component Types and Service Classifications
Determine if a Chassis Is A90-B or A90-D (CLI)
Determine if a Chassis Is A90-B or A90-D (Web Interface)
Power Off the Server Modules and Storage Modules
Power Off Components in the Chassis
Removing Power From the Chassis
Remove Power From the AC Chassis
Remove Power From the DC Chassis
Removing the Chassis From the Rack
Prepare the Chassis for Removal
Remove the Chassis From the Rack
Replacing a Front Fan Module (AC)
Replacing a Server or Storage Module
Replacing an Internal Power Cable (AC)
Returning the Modular System to Operation
Reinstalling the Chassis Into a Rack
There are two chassis models of the modular system:
A90-B
A90-D
Note - Both the A90-B and A90-D chassis exist for the AC model and DC model.
The most visible difference between the two chassis models is the CMM on the rear of the chassis.
Left: CMM (501-7379) on the A90-B chassis
Right: CMM (511-1531) on the A90-D chassis
You can also remotely identify which chassis you have by using Oracle ILOM. See Determine if a Chassis Is A90-B or A90-D (CLI) or Determine if a Chassis Is A90-B or A90-D (Web Interface).
Ensure that you know which chassis you have before removing and replacing components. Some replaceable components are not interchangeable between the two chassis models.
|
1The DC power supply is the same for the A90-B and A90-D chassis.
Note - The firmware for your CMM is specific to each chassis model (A90-B or A90-D). Make sure that you download the software release that is supported by your chassis model.
|