Preparing Your Site Before the System Arrives
Location Restrictions for DC Models
Determining DC Power Requirements
Weight and Size Specifications for Moving and Lifting
Preparing to Install the Modular System
Gather Required Tools and Equipment
Installing the Chassis Into Your Rack
Remove the Power Supplies (AC)
Remove the Power Supplies (DC)
Remove Server and Storage Modules
Identify Rackmounting Hardware for Your Rack Type
Attach Mounting Brackets to Your Rack
Install the Chassis Fan Modules
Install the Power Supplies (AC)
Install the Power Supplies (DC)
Install Server and Storage Modules
Connecting To and Powering On the Modular System
Role of Oracle ILOM During Installation
Connecting Data and Management Cables
Powering On the Modular System
Log Into the CMM Through the SER MGT Port
Configure the CMM NET MGT Port With a Static IP Address
Configure the IP Addresses Using Your DHCP Server
Identify the IP and MAC Addresses
Log Into the CMM Through the NET MGT Port
Change the CMM ILOM root Account Password
Installing Shipping Brackets on a Sun Rack 1000
Understanding Oracle ILOM on the Modular System
Oracle ILOM 3.0 Features Specific to the Modular System
Logging Into and Out of CMM ILOM
Performing Common CMM ILOM Configuration Tasks
Viewing and Configuring IP and MAC Addresses
Administering the Modular System (CMM ILOM)
Managing the Chassis Using the CLI
Accessing Server Modules (CMM ILOM)
Identifying SNMP Trap and PET Event Messages
Understanding Fault Management
Monitoring Faults (Oracle ILOM)
Component Types and Service Classifications
Differences Between Chassis Models and Their Replacement Components
Determine if a Chassis Is A90-B or A90-D (CLI)
Determine if a Chassis Is A90-B or A90-D (Web Interface)
Power Off the Server Modules and Storage Modules
Power Off Components in the Chassis
Removing Power From the Chassis
Removing the Chassis From the Rack
Replacing a Front Fan Module (AC)
Replacing a Server or Storage Module
Replacing an Internal Power Cable (AC)
Returning the Modular System to Operation
Reinstalling the Chassis Into a Rack
Refer to the instructions on the chassis Rack Alignment Template for your model (AC or DC) for detailed instructions on mounting the chassis in a rack. This template is included with the modular system rackmount kit and is also available online (see Related Documentation). Be sure to print out the PDF file of the template at the original scale so the rack spacing indicated on the template is accurate.
Chassis mounting instructions on the template are repeated in the following topics, but you still need the rack alignment template to determine the proper rack hole alignment.
These topics provide the following information:
|