|
|
|
|
|
|---|
Temperature Upper critical threshold has been exceeded |
petTrapTemperatureUpperNonCriticalGoingHigh |
|
Major |
Temperature has increased above upper critical threshold. |
Temperature
Upper critical threshold no longer exceeded |
petTrapTemperatureUpperNonCriticalGoingLowDeassert |
|
Warning |
Temperature has decreased below upper critical threshold. |
Temperature Lower fatal
threshold has been exceeded |
petTrapTemperatureUpperNonRecoverableGoingHigh |
|
Critical |
Temperature has increased above upper nonrecoverable threshold. |
Temperature Lower fatal threshold
no longer exceeded |
petTrapTemperatureUpperNonRecoverableGoingLowDeassert |
|
Major |
Temperature has decreased below upper nonrecoverable threshold. |
Temperature sensor ASSERT |
petTrapTemperatureStateAssertedAssert |
/CH/HOT |
Critical |
Temperature event
occured. Possible cause: CPU is too hot. |
Temperature sensor DEASSERT |
petTrapTemperatureStateDeassertedAssert |
/CH/HOT |
Informational |
Temperature event occured. |
Entity Presence Insert |
petTrapEntityPresenceDeviceInsertedAssert |
/CH/BLx/PRSNT/CH/BLx/HDDx/PRSNT /CH/BLx/FMODx/PRSNT /CH/BLx/ESM/PRSNT /CH/NEMx/PRSNT /CH/PSx/PRSNT |
Informational |
A
device is present or has been inserted. |
Entity Presence Remove |
petTrapEntityPresenceDeviceRemovedAssert |
/CH/BLx/PRSNT/CH/BLx/HDDx/PRSNT /CH/BLx/FMODx/PRSNT /CH/BLx/ESM/PRSNT /CH/NEMx/PRSNT /CH/PSx/PRSNT |
Informational |
A device is absent
or has been removed. |
Module Transition to Running assert |
petTrapModuleBoardTransitionToRunningAssert |
/CH/BLx/STATE/CH/NEMx/STATE |
Informational |
A device has transitioned to
the normal running state. For a blade, this indicates that the host has
powered on. |
Module Transition to In Test assert |
petTrapModuleBoardTransitionToInTestAssert |
/CH/BLx/STATE/CH/NEMx/STATE |
Informational |
A device is in a transitional state.
(Only used for NEMs.) |
Module Transition to Power Off assert |
petTrapModuleBoardTransitionToPowerOffAssert |
/CH/BLx/STATE/CH/NEMx/STATE |
Informational |
A device has powered off. |
Module
Transition to On Line assert |
petTrapModuleBoardTransitionToOnLineAssert |
/CH/BLx/STATE/CH/NEMx/STATE |
Informational |
A device is online and ready to enter
the running state. (Only used for NEMs.) |
Module Transition to Off Line assert |
petTrapModuleBoardTransitionToOffLineAssert |
/CH/BLx/STATE/CH/NEMx/STATE |
Informational |
Unused. |
Module Transition
to Off Duty assert |
petTrapModuleBoardTransitionToOffDutyAssert |
/CH/BLx/STATE/CH/NEMx/STATE |
Informational |
A device is no longer in use and is
ready to be removed. |
Module Transition to Degraded assert |
petTrapModuleBoardTransitionToDegradedAssert |
/CH/BLx/STATE/CH/NEMx/STATE |
Informational |
A device has entered a state
of degraded operation, for example, due to a hardware fault or an overtemperature
condition that caused the device to shut itself down. |
Module Transition to Power Save
assert |
petTrapModuleBoardTransitionToPowerSaveAssert |
/CH/BLx/STATE/CH/NEMx/STATE |
Informational |
Unused. |
Module Install Error assert |
petTrapModuleBoardInstallErrorAssert |
/CH/BLx/STATE/CH/NEMx/STATE |
Informational |
Unused. |
OEM Reserved reporting Predictive Failure |
petTrapOEMPredictiveFailureAsserted12583937 QUESTION This number was
in the C10 doc. Was it supposed to be there? |
/CH/BLx/ERR/CH/BLx/ESM/ERR /CH/NEMx/ERR |
Major |
OEM predictive failure asserted. |
OEM
Reserved Return to normal |
petTrapOEMPredictiveFailureDeasserted |
/CH/BLx/ERR/CH/BLx/ESM/ERR /CH/NEMx/ERR |
Informational |
OEM predictive failure deasserted. |
Fan reporting Predictive Failure |
petTrapFanPredictiveFailureAsserted |
/CH/FMx/ERR/CH/PSx/FAN_ERR |
Major |
Fan Predictive Failure
detected. |
Fan Return to normal |
petTrapFanPredictiveFailureDeasserted |
/CH/FMx/ERR/CH/PSx/FAN_ERR |
Informational |
Fan Predictive Failure state has been cleared. |
Voltage reporting Predictive Failure |
petTrapVoltagePredictiveFailureAssertedAssert |
/CH/PSx/V_3V3_ERR/CH/PSx/Sx/V_IN_ERR /CH/PSx/Sx/V_12V_ERR |
Major |
Voltage
Predictive Failure detected. |
Voltage Return to normal |
petTrapVoltagePredictiveFailureDeassertedAssert |
/CH/PSx/V_3V3_ERR/CH/PSx/Sx/V_IN_ERR /CH/PSx/Sx/V_12V_ERR |
Informational |
Predictive failure state due to voltage event has
been cleared. |
Temperature reporting Predictive Failure |
petTrapTemperaturePredictiveFailureAsserted |
/CH/PSx/TEMP_WRN/CH/PSx/TEMP_ERR |
Major |
System is reporting a predictive failure as a result
of high temperature. |
Temperature Return to normal |
petTrapTemperaturePredictiveFailureDeasserted |
/CH/PSx/TEMP_WRN/CH/PSx/TEMP_ERR |
Informational |
Predictive failure state due to high temperature has
been cleared. |
Fan Lower fatal threshold has been exceeded |
petTrapFanLowerNonREcoverableGoingLow |
/CH/PSx/FANx/TACH |
Critical |
Fan speed has decreased below
lower nonrecoverable threshold. Fan failed or removed. |
Fan Lower fatal threshold no longer exceeded |
petTrapFanLowerNonRecoverableGoingHighDeassert |
/CH/PSx/FANx/TACH |
Major |
Fan
speed has increased above lower nonrecoverable threshold. |
Voltage sensor ASSERT |
petTrapVoltageStateAssertedAssert |
/CH/PSx/Sx/V_OUT_OK |
Informational |
Voltage event occured. |
Voltage sensor
DEASSERT |
petTrapVoltageStateDeassertedAssert |
/CH/PSx/Sx/V_OUT_OK |
Informational |
Voltage event occured. |
Current reporting Predictive Failure |
petTrapCurrentPredictiveFailureAsserted |
/CH/PSx/Sx/I_12V_ERR/CH/PSx/Sx/I_12V_WRN |
Major |
Predictive Failure due to electric current conditions. |
Current Return
to normal |
petTrapCUrrentPredictiveFailureDeasserted |
/CH/PSx/Sx/I_12V_ERR/CH/PSx/Sx/I_12V_WRN |
Informational |
Predictive failure caused by electric current conditions. |
