A P P E N D I X  A

Sun XVR-500 Graphics Accelerator Specifications

This appendix provides I/O port specifications for the Sun XVR-500 graphics accelerator.


I/O Port Specifications

The external I/O ports are accessible through the I/O connectors on the
Sun XVR-500 graphics accelerator backplate (FIGURE A-1).

 FIGURE A-1 Sun XVR-500 Graphics Accelerator I/O Connectors

Figure showing the Sun XVR-500 graphics accelerator I/O backplate connector locations.

The Sun XVR-500 graphics accelerator has the following external I/O ports:

Video Output Port

The video output port is a HD15 15-pin connector that connects the workstation monitor.

The video connector supports DDC2 monitor support and Display Power Management Signaling (DPMS).

 

TABLE A-1 Sun XVR-500 Graphics Accelerator HD15 Video Output Port

Pin

Signal

1

Red analog video

2

Green analog video

3

Blue analog video

4

No Connect

5

Ground

6

Ground

7

Ground

8

Ground

9

+5V Supply

10

Ground

11

No Connect

12

DDC Bidirectional Data (SDA)

13

Horizontal/Composite Sync

14

Vertical Sync

15

DDC Data Clock (SCL)


Stereo Output Port

FIGURE A-2 and TABLE A-3 shows the Sun XVR-500 graphics accelerator stereo connector and pinout signals.

 FIGURE A-2 Sun XVR-500 Graphics Accelerator 7-Pin DIN Female Stereo Connector

Figure showing the stereo connector and pin signal number correlation.
TABLE A-2 Sun XVR-500 Graphics Accelerator Stereo Connector Pinout

Pin

Signal

1

Signal ground

2

5.0V (Fused, will supply up to 300mA, limited to 1.0A)

3

12.0V (Fused, will supply up to 300mA, limited to 1.0A)

4

Master stereo field Select Out

5

Slave stereo field Select In

6

No connect

7

No connect



Screen Resolutions and Video Formats

TABLE A-3 lists the monitor screen resolutions and video formats supported by the Sun XVR-500 graphics accelerator:

TABLE A-3 Sun XVR-500 Graphics Accelerator Monitor Screen Resolutions

Display Resolution

Vertical Refresh Rate

Sync Standard

Aspect Ratio Format

1920 x 1080

72 Hz

Sun

16:9

1600 x 1280

76 Hz

Sun

5:4

1600 x 1200

75 Hz

VESA

4:3

1600 x 1000

66, 76 Hz

Sun

16:10

1440 x 900

76 Hz

Sun

16:10

1280 x 800

112Hz

Sun-stereo

16:10

1280 x 800

76 Hz

Sun

16:10

1280 x 1024

60, 75, 85 Hz

VESA

5:4

1280 x 1024

67, 76 Hz

Sun

5:4

1152 x 900

112, 120 Hz

Sun-stereo

5:4

1152 x 900

66, 76 Hz

Sun

5:4

1024 x 800

84 Hz

Sun

5:4

1024 x 768

75 Hz

VESA

4:3

1024 x 768

60, 70, 77 Hz

Sun

4:3

960 x 680

108, 112 Hz

Sun-stereo

Sun-Stereo

768 x 575

50i Hz

PAL

PAL

640 x 480

60 Hz

VESA

4:3

640 x 480

60i Hz

NTSC

NTSC




Note - The 640 x 480 resolutions support Sun OpenGL for Solaris multisampling capable of two samples per pixel.
You can find configuration details with
fbconfig -help, /usr/lib/fbconfig/SUNWifb_config -help, or in the SUNWifb_config man page (see Man Pages).




Accessing Field Replaceable Unit Information

The Sun XVR-500 graphics accelerator features a system for identifying the board by means of a FRU ID (field replaceable unit identifier). This information is contained on a PROM chip mounted on the Sun XVR-500 graphics accelerator.

A FRU ID allows you to identify the Sun XVR-500 graphics accelerator serial number and other data using fbconfig.

single-step bulletTo obtain FRU ID information, type:

% fbconfig -dev ifb0 -prconf
--- Hardware Configuration for /dev/fbs/ifb7 ---
Type: XVR-500 (Expert3D-Lite compatible)
Hardware Revision: -01 rev50
Sun Serial Number: 3753069005783
Manufacture Date: Tue Jul 02 10:01:00 2002
PROM Information:  @(#)ifb.fth 1.65 01/04/06 SMI
EDID Data: Available - EDID version 1 revision 1
Monitor type: Sun P/N 365-1383 S/N 9906KN4883
Monitor possible resolutions: 1024x768x60, 1024x768x70, 1024x768x75, 
1152x900x66, 1152x900x76, 1280x1024x67, 1280x1024x75, 1280x1024x76, 
960x680x112s, 640x480x60, 1600x1200x75
Current resolution setting: 1280x1024x75
Slave Mode: Disabled
Video Memory Total: 33554432
Video Memory Used: 20971520
Texture Memory Total: 16777216
Texture Memory Used: 4096
Display List Memory Total: 16777216