How to Install Hardware Management Components Using Console Mode

Before You Begin

To install Management Pack components with Oracle Hardware Management Pack Installer, you must be logged into your system with Administrator privileges.
Down load and extract the Hardware Management Pack Software. See Getting the Software.

The directory that you extract the files is referred to as extract-directory in this procedure.
For Windows SP2 or earlier, you must first install the Sun IPMI System Management Driver. See Installing the Sun IPMI System Management Driver 2.1 in Oracle Hardware Management Pack 2.1 Installation Guide.

Set up a console session with the server.
See product documentation for instructions on doing this.

To start the installer, issue one of the following commands:

For Solaris or Linux systems: /extract-directory/oracle-hmp-2.1/SOFTWARE/install.bin -i console
For Windows systems: \extract-directory\oracle-hmp-2.1\SOFTWARE\install.exe -i console

You will see output similar to the following:

Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...

Launching installer...

Preparing CONSOLE Mode Installation...


===============================================================================
Oracle Hardware Management Pack                  (created with InstallAnywhere)
-------------------------------------------------------------------------------




===============================================================================
Introduction
------------

InstallAnywhere will guide you through the installation of Oracle Hardware
Management Pack.

It is strongly recommended that you quit all programs before continuing with
this installation.

Respond to each prompt to proceed to the next step in the installation.  If you
want to change something on a previous step, type 'back'.

You may cancel this installation at any time by typing 'quit'.

PRESS <ENTER> TO CONTINUE:

Press Enter to Continue.

The following screen appears:

Choose Install Set
------------------

Please choose the Install Set to be installed by this installer.

  ->1- Standard

    2- Customize...

ENTER THE NUMBER FOR THE INSTALL SET, OR PRESS <ENTER> TO ACCEPT THE DEFAULT:

Type the number for your choice or press Enter to select Standard.
- If you selected Standard installation, go to Step 6.
- If you selected Custom installation, the following screen appears.
```
ENTER A COMMA_SEPARATED LIST OF NUMBERS REPRESENTING THE FEATURES YOU WOULD
LIKE TO SELECT, OR DESELECT. TO VIEW A FEATURE'S DESCRIPTION, ENTER
'?<NUMBER>'. PRESS <RETURN> IF YOU ARE DONE:    

    1- [X] Hardware Management Agents
    2- [X] CLI Tools
    3- [ ] IPMITool

Please choose the Features to be installed by this installer.:
```
Options 1 and 2 are pre-selected. When you enter a number, it will select an item that is not selected and deselect an item that is already selected.
For example, if you type 1, 3 Hardware Management Agents is deselected and IPMITool is selected.

Type one or more numbers separated by a comma.

If you chose to install Agents, the following screen appears. If you did not choose to install agents, go to Step 8.

Configure Hardware Management Agent
-----------------------------------

Start the Hardware Management Agent? This agent's short name is hwmgmtd.

  ->1- Yes
    2- No

ENTER THE NUMBER FOR YOUR CHOICE, OR PRESS  TO ACCEPT THE DEFAULT::

Type the number for your choice or press Enter to select Yes.

The following screen appears:

Configure SNMP Agent
--------------------

Start the SNMP agent? This agent's short name is snmpd on Unix and SNMP on Windows.

  ->1- Yes    
    2- No

ENTER THE NUMBER FOR YOUR CHOICE, OR PRESS  TO ACCEPT THE DEFAULT::

Type the number for your choice or press Enter to select Yes..

The following screen appears, if you selected CLI Tools in Step 5. If you did not select CLI Tools, go to Step 10:

Configure LAN Over USB
----------------------

Configure the LAN-over-USB interconnect between the host and ILOM.  
This is a high-speed connection that allows fast communication with ILOM using an 
internal IP address.  This enables IPMI and SSH clients as well as a web browser 
running on the host operating system to connect directly to ILOM.

  ->1- Configure automatically
    2- Configure manually
    3- Do not configure

ENTER THE NUMBER FOR YOUR CHOICE, OR PRESS <ENTER> TO ACCEPT THE DEFAULT:

Type the number for your choice or Enter to select Configure automatically.

If you choose 1 or 3, go to Step 11. If you choose 2–Configure manually, the following screen appears.

Configure LAN Over USB Manually
-------------------------------

Specify the following parameters.

IP Address: (DEFAULT: 192.168.1.1):

Netmask: (DEFAULT: 255.255.255.0):

Host IP Address: (DEFAULT: 192.168.1.2):

Enter the appropriate values for the IP Address, Netmask, and Host IP Address and press Enter.

A screen similar to the following appears, to confirm your installation choices.

Pre-Installation Summary
------------------------

Please Review the Following Before Continuing:

Product Name:
    Oracle Hardware Management Pack

Install Folder:
    /opt/sun-ssm

Install Set:
    Custom

Product Features:
    Hardware Management Agents,
    CLI Tools

Start Agents:
    Hardware Management Agent (hwmgmtd), SNMP Agent (snmpd/SNMP)

LAN Over USB:
    Configure manually

Disk Space Information (for Installation Target):
    Required:  930,151 bytes
    Available: 11,144,399,872 bytes


PRESS <ENTER> TO CONTINUE

Make sure that the information displayed is correct.
- If the information is not correct, type Back until you get back to the screen where you want to change the information.
- If the information shown in the screen is correct, press Enter to continue.
The following screen appears:
```
Ready To Install
----------------

InstallAnywhere is now ready to install Oracle Hardware Management Pack onto
your system at the following location:

   /opt/sun-ssm

PRESS <ENTER> TO INSTALL:
```
Press Enter to begin the installation.
The installation should take about 2 minutes. A progress bar is displayed as the installation proceeds.
When the installation is complete, the following screen appears:
```
Installation Complete
---------------------

Congratulations. Oracle Hardware Management Pack has been successfully
installed to:

   /opt/sun-ssm

PRESS <ENTER> TO EXIT THE INSTALLER:
```

Skip Navigation Links
Exit Print View
	Oracle Server CLI Tools and IPMItool 2.1 User's Guide