| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Integrated Lights Out Manager (ILOM ) 3.0 Supplement for the Sun Blade X6275 M2 Server Module |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle Integrated Lights Out Manager (ILOM ) 3.0 Supplement for the Sun Blade X6275 M2 Server Module |
About This Documentation (PDF and HTML)
Overview of the ILOM Supplement
Dual-Node Identification In CMM ILOM
Clearing Server and CMM Faults
Managing Power Usage and Monitoring Power Consumption
How to View Power Management Properties Using the Web Interface
How to View Power Management Properties Using the CLI
Configuring the Server Power Restore Policy
How to Set the Server Power Restore Policy Using the ILOM Web Interface
How to Set the Server Power Restore Policy Using the ILOM CLI
How to Switch Default Serial Port Output Using the ILOM Web Interface
How to Switch Default Serial Port Output Using the ILOM CLI
Determining Current Firmware Versions
How to Download Firmware Updates
Using ILOM to Update System BIOS and ILOM Firmware
Alternate Methods for Updating the System BIOS and ILOM Firmware
Resetting the Service Processor After an Update
Clearing CMOS Settings After an Update (Optional)
Using the edit Command and Configuring the Preboot Menu For Remote Access
Resetting the Root Password to the Factory Default
Restoring ILOM Access to the Serial Console
Recovering the SP Firmware Image
Indicators, Sensors, and Traps
You can switch the default serial port output of the server module between the SP console and the host console. By default, the SP console is connected to the external serial management port (accessible through the multi-port cable that can be plugged into the front panel of the blade). This feature allows you to view non-ASCII character traffic from the host console.
Note - Set up the network connection to the server module SP before attempting to switch the serial management port owner to the host server. If a network is not set up, and you utilize a direct serial connection using the multi-port cable to switch the serial management port owner to the host server, you will be unable to connect via the ILOM CLI interface or web interface to change the serial management port owner back to the SP. To change ownership of the serial management port back to the SP, you must perform the procedures in Restoring ILOM Access to the Serial Console.
Choose one of the following methods to switch serial port console access:
|