Skip Navigation Links | |
Exit Print View | |
Oracle Integrated Lights Out Manager (ILOM ) 3.0 Supplement for the Sun Blade X6275 M2 Server Module |
About This Documentation (PDF and HTML)
Overview of the ILOM Supplement
Dual-Node Identification In CMM ILOM
Clearing Server and CMM Faults
Managing Power Usage and Monitoring Power Consumption
How to View Power Management Properties Using the Web Interface
How to View Power Management Properties Using the CLI
Configuring the Server Power Restore Policy
How to Set the Server Power Restore Policy Using the ILOM Web Interface
How to Set the Server Power Restore Policy Using the ILOM CLI
Switching the Default Serial Port Output Between SP and Host Console
How to Switch Default Serial Port Output Using the ILOM Web Interface
How to Switch Default Serial Port Output Using the ILOM CLI
Determining Current Firmware Versions
How to Verify the BIOS and ILOM Firmware Versions Using the Web Interface
How to Verify the BIOS and ILOM Firmware Versions Using the CLI
How to Download Firmware Updates
Using ILOM to Update System BIOS and ILOM Firmware
How to Update the System BIOS and ILOM Firmware Using the ILOM Web Interface
How to Update the System BIOS and ILOM Firmware Using the ILOM CLI
Alternate Methods for Updating the System BIOS and ILOM Firmware
Clearing CMOS Settings After an Update (Optional)
Using the edit Command and Configuring the Preboot Menu For Remote Access
Resetting the Root Password to the Factory Default
Restoring ILOM Access to the Serial Console
Recovering the SP Firmware Image
Indicators, Sensors, and Traps
After updating a node's system BIOS and ILOM firmware, you must reset the ILOM SP.
To reset the ILOM SP, you can do any of the following:
If you use the web interface, this happens automatically.
From the ILOM CLI, use the following command:
->reset /SP
Using IPMItool, use the following command:
ipmitool -U root -P password -H SP-IPaddress bmc reset cold
Where SP-IPaddress is the IP address of the service processor.
Reset the ILOM SP by shutting down the host, then removing and restoring AC power cords to the system.