System Overview

Includes basic information about your system, motherboard, BIOS, processor, memory cache, drives, video, modem, network, buses, and ports.

Hardware ID Image

Enables you to create a document showing information about your system, including comparisons between the updates and the newest versions of your system. XML is the format used to create and display this information; however, you can also choose a text (.txt) format.

System Management Information

Provides information obtained from the system about the BIOS type, system, motherboard, enclosure, processors, memory modules, cache, slots, system event log, memory array, memory devices, memory device mapped addresses, and system boot.

PCI Bus Information

Includes details about specific devices from pci-config space within the system, similar to the System Management Information option.

IDE Bus Information

Shows the master/slave devices on the primary and secondary IDE controllers.

PCMCIA/CardBus Information

Might not be relevant to all servers.

Interrupt Vectors

Lists and details device interrupt vector information.

IRQ Information

Shows hardware interrupt assignments.

Device Drivers

Shows device drivers loaded under Open DOS.

APM Information

Tests the Advanced Power Management (APM) capabilities of the system. You can choose to change the power state, view the power status, indicate CPU usage, get a power management (PM) event, or change the interface mode.

I/O Port Browser

Shows the I/O port assignments for the hardware devices on the system.

Memory Browser

Enables you to view the mapped memory for the entire system.

Sector Browser

Reads sector information from the hard disks and DVD disks sector by sector.

CPU Frequency Monitor

Tests the processor speed.

CMOS RAM Utilities

Shows the CMOS settings of the system.

SCSI Utilities

Might not be relevant to all servers.

Text File Editor

Opens a text file editor.

Startup Options

Enables you to set up options for diagnostic testing.