Skip Navigation Links | |
Exit Print View | |
Sun Server X2-8 (formerly Sun Fire X4800 M2) Rackmounting Hardware Installation Guide Sun Server X2-8 (formerly Sun Fire X4800 M2) Documentation Library |
Introduction to Rack Mounting Hardware Installation
How to Identify Your Rack Mounting Kit
Installing the Server In the Rack Using the Standard Rack Mounting Kit
Contents of the Standard Rack Mounting Kit
Location of the Rack Mounting Kit and the Shipping Bracket Kit
Installing the Server In a Rack Using the Standard Rack Mounting Kit
Removing and Installing the Standard Rack Mounting Kit Shipping Brackets
Installing the Server in the Rack Using the Universal Rack Mounting Kit
Contents of the Universal Rack Mounting Kit
Installing the Server in a Rack Using the Universal Rack Mounting Kit
How to Remove Components to Reduce Weight
How to Replace the Components in the Server
How to Install the Universal Rack Mounting Hardware in a Square-Hole Rack
How to Install the Universal Rack Mounting Hardware in a Round-Hole Rack
How to Insert the Server Into the Rack
Installing and Removing the Universal Rack Mounting Kit Shipping Brackets
How to Install the Universal Rack Mounting Kit Shipping Brackets
How to Remove the Universal Rack Mounting Kit Shipping Brackets
The rack mounting hardware is compatible with a wide range of equipment racks that meet the following standards:
Four-post rack (mounting at both front and rear).
Note - Two-post racks are not compatible.
Rack must have 5RU space available.
Rack should have a horizontal opening and unit vertical pitch conforming to ANSI/EIA 310-D-1992 or IEC 60927 standards.
Distance between front and rear mounting planes between approximately 26 and 34.5 inches (660.4 mm and 876.3 mm).
Minimum clearance depth (to front cabinet door) in front of front rack mounting plane: 1 inch (25.4 mm).
Minimum clearance depth (to rear cabinet door) behind front rack mounting plane: 27.5 inches (700 mm).
Minimum clearance width (between structural supports and cable troughs) between front and rear mounting planes: 18 inches (456 mm).