This chapter provides an overview of the updates made to the software and documentation for release 11.1.1.5.0 of the PeopleSoft Employee Reconciliation connector.
The updates discussed in this chapter are divided into the following categories:
This section describes updates made to the connector software.
Documentation-Specific Updates
This section describes major changes made to this guide. These changes are not related to software updates.
The following section discusses the software updates:
The following are software updates in release 11.1.1.5.0:
This release of the connector supports dynamic reconciliation of Manager ID values during incremental reconciliation operations.
When you perform a full reconciliation for the first time, you must run the PeopleSoft HRMS Manager Reconciliation scheduled task to reconcile the Manager ID values. During the subsequent incremental reconciliation operations, the Manager ID values are reconciled dynamically. Previously, you had to run the PeopleSoft HRMS Manager Reconciliation scheduled task after each incremental reconciliation operation.
See Reconciliation of the Manager ID Attribute for more information.
This release of the connector has a simplified process to deploy the PeopleSoft Listener compared to previous releases. The deployment is simplified using a new deployment tool. See Deploying the PeopleSoft Listener for more information.
This release of the connector has the following new configuration lookup definitions:
Lookup.PSFT.HRMS.Configuration
This lookup definition stores configuration information used by the connector. See Lookup.PSFT.HRMS.Configuration and Setting Up the Lookup.PSFT.HRMS.Configuration Lookup Definition for more information.
Lookup.PSFT.HRMS.ManagerRecon.Configuration
This lookup definition provides a list of values used by the PeopleSoft HRMS Manager Reconciliation scheduled task to read the values required to run the task. See Lookup.PSFT.HRMS.ManagerRecon.Configuration and Running the PeopleSoft HRMS Manager Reconciliation Scheduled Task for more information.
The following table lists issues resolved in this release of the connector:
| Bug Number | Issue | Resolution |
|---|---|---|
|
13091034 |
When the User ID attribute was reconciled into a UDF rather than into a User Login field in Oracle Identity Manager, the Manager ID value was not updated. |
This issue has been resolved. The Manager ID value is now updated when the User ID attribute is reconciled into a UDF. |
The following section discusses the documentation-specific updates:
The following documentation-specific updates have been made in revision "25" of this guide:
The "Target System" row of Table 1-1 has been modified to include support for PeopleSoft HRMS 9.2 with PeopleTools 8.59.
The following documentation-specific updates have been made in revision "24" of this guide:
The "Target System" row of Table 1-1 has been modified to include support for PeopleSoft HRMS 9.2 with PeopleTools 8.58.
The following documentation-specific update has been made in revision "23" of this guide:
The "Oracle Identity Governance or Oracle Identity Manager" row of Table 1-1 has been updated.
The following documentation-specific updates have been made in revision "22" of this guide:
The "Oracle Identity Governance or Oracle Identity Manager" row of Table 1-1 has been updated to include support for Oracle Identity Governance release 12c PS4 (12.2.1.4.0).
The following documentation-specific updates have been made in revision "21" of this guide:
The "Target System" row of Table 1-1 has been modified to include support for PeopleSoft HRMS 9.2 with PeopleTools 8.57.
The update on PeopleSoft HRMS 9.2 with PeopleTools 8.57 has been made in the following sections:
The following documentation-specific update has been made in revision "20" of this guide:
The Code Key and Decode values in Step 5 of Setting Up the Lookup.PSFT.HRMS.ExclusionList Lookup Definition have been modified.
The "Note" in Step 5c of Creating a Target System User Account for Connector Operations has been modified.
The following documentation-specific update has been made in revision "19" of this guide:
The "Oracle Identity Manager" row of Table 1-1 has been renamed as "Oracle Identity Governance or Oracle Identity Manager" and also updated for Oracle Identity Governance 12c (12.2.1.3.0) certification.
The following documentation-specific updates have been made in revision "18" of this guide:
The "Target System" row of Table 1-1 has been modified to include support for PeopleSoft HRMS 9.2 with PeopleTools 8.56.
The update on PeopleSoft HRMS 9.2 with PeopleTools 8.56 has been made in the following sections:
The following documentation-specific updates have been made in revision "17" of this guide:
The description of the ORACLE_COMMON environment variable in Deploying the PeopleSoft Listener has been modified.
The "Note" in "Displaying the EI Repository Folder" has been modified to include later versions of PeopleTools after 8.53.
The "Note" in Step 3 of "Activating the WORKFORCE_FULLSYNC Service Operation" has been modified about the usage of WORKFORCE_SYNC.INTERNAL service operation.
The following documentation-specific updates have been made in revision "16" of this guide:
The "Target System" row of Table 1-1 has been modified to include support for PeopleSoft HRMS 9.2 with PeopleTools 8.55.
Information regarding the default status of an OIM User has been modified from "Active" to "Disabled" in Reconciliation of Effective-Dated Lifecycle Events.
Information regarding PeopleSoft HRMS 9.2 with PeopleTools 8.55 has been added to the following sections:
Oracle Identity Manager interface names have been corrected throughout the document.
The following documentation-specific update has been made in revision "15" of this guide:
The "Target System" row of Table 1-1 has been modified to include support for PeopleSoft HRMS 9.1 with PeopleTools 8.53.
The following documentation-specific updates have been made in revision "14" of this guide:
The "Connector Server" row has been added to Table 1-1.
The "JDK" row of Table 1-1 has been renamed to "Connector Server JDK".
All instances of WLS_HOME have been replaced with WL_HOME in Deploying the PeopleSoft Listener.
The following documentation-specific updates have been made in revision "13" of this guide:
Information specific to HRMS 9.2 has been added to the "Note" present in the following sections:
The first "Note" present in Configuring the WORKFORCE_FULLSYNC Service Operation has been modified.
The "Target systems" row of Table 1-1 has been updated.
The "Note" in Step 3 of the Activating the PERSON_BASIC_FULLSYNC Service Operation area of Configuring the PERSON_BASIC_SYNC Service Operation has been updated.
The "Note" in Step 3.c of the Defining the Routing for the PERSON_BASIC_FULLSYNC Service Operation area of Configuring the PERSON_BASIC_SYNC Service Operation has been added.
An issue related to workforce incremental reconciliation has been added to Troubleshooting.
The following documentation-specific updates have been made in revision "12" of this guide:
The "Oracle Identity Manager" row of Table 1-1 has been updated.
Information specific to Oracle Identity Manager 11g Release 2 PS3 (11.1.2.3.0) has been added to Usage Recommendation.
The following documentation-specific update has been made in revision "11" of this guide:
A "Note" regarding lookup queries has been added at the beginning of Extending the Functionality of the Connector.
The following are documentation-specific updates in revision "10" of this guide:
A "Note" has been added to Step 5.c of Creating a Role for a Limited Rights User.
A "Note" has been added to Step 6.e of Assigning the Required Privileges to the Target System Account.
The following is a documentation-specific update in revision "9" of this guide:
The "Oracle Identity Manager" row of Table 1-1 has been modified to include Oracle Identity Manager 11g Release 2 PS2 (11.1.2.2.0).
The following is a documentation-specific update in revision "8" of this guide:
The "Oracle Identity Manager" row in Table 1-1 has been modified.
The following are documentation-specific updates in revision "7" of this guide:
Information about including the jrf.jar, jrf-api.jar, and jrf-client.jar files for Oracle Identity Manager release 11.1.2.x has been added as Step 2 in Testing Reconciliation.
PeopleSoft HRMS 9.2 with PeopleTools 8.53 has been added as a supported target system for this connector. This information has been added in the "Target System" row of Table 1-1.
HRMS 9.2 has been added to the first note in Configuring the WORKFORCE_FULLSYNC Service Operation.
Information about password encryption has been added to Step 1.g in the procedure for Configuring PeopleSoft Integration Broker, in Configuring the PeopleSoft Integration Broker.
The first point has been added to the note in the procedure for Displaying the EI Repository Folder in the following sections:
A note has been added to the procedure for Activating the WORKFORCE_FULLSYNC Message in the following sections:
The name of the "Known Issues" chapter has been changed to "Known Issues and Workarounds" In addition, Known Issues and Workarounds has been restructured.
The following are documentation-specific updates in revision "6" of this guide:
The "Oracle Identity Manager" row in Table 1-1 has been modified.
Displaying UDFs in Oracle Identity Manager 11.1.2.x or Later has been added.
Instructions specific to Oracle Identity Manager release 11.1.2.x have been added in the following sections:
The following documentation-specific updates have been made in the earlier revisions of the release 11.1.1.5.0:
Revision "5"
Added Deploying the PeopleSoft Listener on WebSphere Application Server.
Added a procedure to display UDFs in Oracle Identity Manager release 11.1.2 in Configuring the Scheduled Task for Person Data Reconciliation.
Added bug 13497967 to Known Issues and Workarounds
Revision "4"
In Table 1-1 the PeopleSoft HRMS 9.1 with PeopleTools 8.52 has been added as a newly certified target system.
Revision "3"
In Table 1-1 the Oracle Identity Manager version has been updated to Release 11.1.1.5 BP02.