Structuring Inventory

This chapter provides an overview of inventory structure and discusses how to:

• Set up PeopleSoft Inventory structure tables.

• Define and maintain material storage locations.

• Search for material storage locations.

• View material storage location information.

• Establish putaway and picking zones.

• Define and maintain containers.

Understanding Inventory Material Storage Structures

You can configure the system to reflect the physical layout of your warehouse and to establish rules governing the storage and movement of materials within the warehouse.

For each business unit, you define material storage locations made up of storage areas and storage levels. A material storage location is a division of a business unit used to store material and to track inventory transactions. Your material storage locations might include shipping and receiving docks, staging areas, warehouse zones, inspection areas, and quality control departments. Each material storage location contains a storage area that can be divided into a maximum of four levels, with each level representing a physical subdivision of the area. For example, you might have a three-level warehouse area consisting of 15 aisles, with 10 cabinets per aisle and 5 shelves per cabinet. The combination of a storage area and that area's most detailed storage level constitutes a material storage location. Each material storage location is identified by area and level.

The following diagram illustrates the hierarchical relationship between material storage locations, storage areas, and levels. Zone A is the storage area. The aisles constitute level one, the cabinets constitute level two, and the shelves make up level three. The combination of storage areas and levels create a material storage location where stock can be placed or retrieved.

An example of a storage structure hierarchy within a PeopleSoft Inventory business unit

Establishing Storage Structures

You can design a different level structure for different areas of your warehouse; tailoring individual structures to fit business needs and the physical layout of your business unit. You might want a four-level structure for a primary storage area consisting of aisles, cabinets, shelves, and drawers, and a two-level structure for a staging area containing rows of pallets. In certain cases (if you have a bulk storage area containing only one item, for example), you might want to set up a material storage location with a storage area but no levels.

You define default material storage location attributes for a setID on the Inventory Options page. You then define attributes for individual storage areas on the Storage Areas page and for material storage locations on the Material Storage Locations page.

Closing Storage Structures

When storage areas and material storage locations no longer physically exist in your warehouse, you can mark them for closure in the system records. The Closed check box, available on both the Storage Areas and Material Storage Locations pages, enables you to indicate that the structure is no longer active and is ready to be deleted from the system. To close an entire storage area, select the Closed check box on the Storage Areas page; when you save the page, PeopleSoft Inventory automatically closes all material storage locations defined with that area. To close a specific material storage location, use the check box on the Material Storage Locations page. You can also use the Select All and Deselect All buttons to mark all locations on the page as closed or to unmark all locations.

Important! Closure is permanent. After you save either page, you cannot reopen the closed storage structure. If you want to inactivate a material storage location temporarily, use the Suspend option.

The following conditions must exist before you can close a storage structure. If any condition is not met, PeopleSoft Inventory issues an error message and cancels the close.

• For storage areas only, all material storage locations assigned to a storage area are empty (there is zero on-hand and zero reserved quantity in the PHYSICAL_INV record).

  If the area is not empty and you want to close it, transfer all of the stock to another storage area.

• For material storage locations only, the material storage location is empty.

  If the material storage location is not empty and you want to close it, transfer all of the stock to another location.

• The storage area or material storage location is not associated with a production area, production replenishment location for an item, or work center in PeopleSoft Manufacturing.

  Before you can close the material storage location, you must use either the Production Area Summary page or the Defining Production Area/Item Detail page to disassociate the location from the production area.

• There are no open transactions involving the area or material storage location.

  No open transactions can exist in the following tables:

  • Manufacturing Production (SF_PRDN_AREA).

    To avoid errors, use either the Production Area Summary page or the Item Detail page to disassociate the material storage location from the production area.

  • Data Collection Transaction (BCT_DTL).

    To avoid errors, run all processes that affect the storage structure that you want to close.

  • Putaway Staging (STAGED_ITEM_INV and STAGED_INF_INV).

    To avoid errors, run the Load Staged Items (INPSSTGE) and Complete Putaway (INPPPTWY) processes.

  • Purchasing Receipts (RECV_LN_ASSET).

    To avoid errors, make sure no receipts have been assigned to the material storage location.

  • Shipments (IN_DEMAND tables).

    To avoid errors, run the Deplete On Hand Qty (Depletion) process (IN_FUL_DPL).

  • Inventory Counts (COUNT_INF_INV and COUNT_INV).

    To avoid errors, run the Stock Quantity Update process (INPOPOST) or cancel the open counting event.

  • Manufacturing Picking (SF_ISS_TRANSFER).

    To avoid errors, use the Review Plan to remove the material storage location from any picking plans on which it appears.

  • Manufacturing Work Center (EN_WORK_CENTER).

    To avoid errors, make sure that the material storage location is not designated as a work center WIP location. Use the Define Work Center page to disassociate the location from the work center.

When you close a material storage location that has been assigned as a default putaway, fixed picking, RMA, ship staging location, cross-docking, or pegging location, PeopleSoft Inventory issues a warning message and gives you the option of canceling the close. Once you save the close, the system automatically deletes the material storage location from all tables and issues a warning that you cannot reopen the location.

Closed storage areas and material storage locations do not appear as options on transaction pages, and you cannot perform transactions against them. You can, however, include them in the Inventory Purging process (IN_PURGE).

Storage Location Capacity Checking

The PeopleSoft Inventory capacity-checking feature helps you manage storage capacity by identifying the best material storage locations for putaway transactions. In capacity-checking environments, transactions that update material storage location quantity balances also calculate and update the material storage location's current occupied capacity. For online transactions, the system issues a warning message if the transaction quantity exceeds the maximum capacity of the material storage location.

Note. For stock stored in containers, the capacity-checking calculations consider only the weight and volume of the stock occupying the container; they do not consider the container's weight and volume.

You activate cubic-capacity checking, weight-capacity checking, or both at the setID level on the Inventory Options page; the options that you select become the default values for new material storage locations. You can deactivate capacity checking for individual material storage locations on the Material Storage Locations page. For example, although you might want to enable capacity checking for most locations, you should disable the feature for material storage locations with unlimited capacity (locations that are unlikely ever to be overfilled, such as staging locations).

Note. The system defines inspection locations as having unlimited capacity. You cannot activate capacity checking for material storage locations that are defined as inspection locations on the Material Storage Locations page.

You can always deactivate capacity checking for a given material storage location, but you can only activate it at the material storage location level if capacity checking is active for the setID. Conversely, once capacity-checking storage locations are defined for a business unit, you cannot disable the feature at the setID level until you disable it for all material storage locations in business units belonging to the setID.

Weight Capacity Processing

Transactions that update a material storage location's weight capacity use the following processing steps:

1. Retrieve the weight established for the item.

   Look first for the stocking weight defined on the Define Business Unit Item - Inventory: Weight/Volume page. If no weight is defined at this level, check for the stocking weight defined on the UOM Weight/Volume page, and finally for the stocking weight defined on the Define Item - General: Dimensions page. If there is still no weight information for the item, issue a warning that the weight cannot be calculated and checked against capacity.

2. Convert the item's weight to the unit of measure defined for the material storage location's weight on the Inventory Options page, using the conversion factor established on the Units of Measure page.

   If no conversion factor exists, issue a warning that the weight cannot be calculated and checked against capacity.

3. Multiply the converted weight by the adjustment quantity and add the result to the occupied weight recorded for the location.

4. If the adjustment quantity for the material storage location is positive, compare the calculated weight with the maximum weight capacity established for the location on the Material Storage Locations page.

   If the new occupied weight exceeds the capacity of the material storage location, issue a warning.

5. When saving the page, update the material storage location's occupied weight with the calculated weight.

Volume Capacity Processing

Transactions that update a material storage location's cubic capacity use the following processing steps:

1. Retrieve the item's height, length, and width.

   Look first for the stocking dimensions defined on the Define Business Unit Item - Inventory: Weight/Volume page. If no volume is defined at this level, check for the stocking dimensions defined on the UOM Weight/Volume page, and finally for the stocking dimensions defined on the Define Item - General: Dimensions page. If there is still no volume information for the item, issue a warning that the volume cannot be calculated and checked against the cubic capacity.

2. Convert the item's dimensions to the unit of measure defined for the material storage location's dimensions on the Inventory Options page, using the conversion factor established on the Units of Measure page.

   If no conversion factor exists, issue a warning that the volume cannot be calculated and checked against the cubic capacity.

3. Multiply the converted item dimensions by the adjustment quantity and add the result to the occupied volume recorded for the material storage location.

4. If the adjustment quantity for the material storage location is positive, compare result with the maximum cubic capacity calculated from the dimensions established for the location on the Material Storage Locations page.

   If the new occupied volume exceeds the cubic capacity of the material storage location, issue a warning.

5. When saving the page, update the material storage location's occupied volume with the calculated volume.

Capacity Processing in Negative Inventory Environments

The occupied weight or volume of materials in a material storage location cannot be driven negative. In negative inventory environments, the system uses only the portion of the adjustment quantity that reduces the item quantity to zero to calculate the location's occupied weight or volume. For example, if you store 10 each of an item in a given material storage location and enter an adjustment for -12 each, the system uses -10 of each item to calculate the occupied weight or volume. Any transaction that drives the item quantity negative drives the occupied weight and volume for the material storage location to zero.

Online Capacity Recalculation

If you ignore warnings that capacity cannot be calculated because there is not enough data available to calculate weight or volume, the occupied weight and volume fields for the material storage location will not be accurate. If you supply the missing information (conversion factor, item weight, dimensions, and so forth) after the warning is issued, future transactions are accounted for correctly, but the occupied weight and volume of the material storage location does not reflect the transactions that occurred before the required data was available.

To update the capacity for the material storage location correctly, calculate the capacity online using the Volume/Weight Capacity Checking page. Select the Calc Capacity at save time (calculate capacity at save time) option, click OK, and then save the Material Storage Locations page.

Note. Each time you recalculate the occupied capacity of a material storage location online, you must select the Calc capacity at save time option. Once the capacity of the location is recalculated and updated, the system clears the check box.

See Also

Defining Item Quantities

Single-Item Storage

To optimize material handling, prevent product contamination, and define dedicated areas of your warehouse, you may want to ensure that only one item ID is stored in a given material storage location. You can define single-item storage as an attribute of either the item or the material storage location.

You can specify on the Define Business Unit Item - Inventory: Shipping/Handling page whether an item should be isolated. Items marked for isolation can be put away or transferred only to empty material storage locations or to locations containing stock with the same item ID. Once stock marked for isolation has been transferred to an empty material storage location, you cannot use that location for stock with any other item ID until the quantity in the location has been fully depleted.

You can also use the Volume/Weight Capacity Checking page (accessed from the Material Storage Locations page) to restrict a material storage location to holding a single item ID. Specifying single-item storage as an attribute of the material storage location enables you to segregate items by location in one area of your warehouse, but store them together (in a kitted container for manufacturing, for example) in another area of the warehouse.

If you define single-item storage for a location, you can specify which item ID the location should contain. The system then permits only stock matching that item ID to be put away or transferred to the location. If you do not specify an item ID for a single-item material storage location, the first putaway or transfer transaction to the empty material storage location defines the only item ID that the location can contain until the item quantity has been fully depleted. After the material storage location has been emptied, stock with another item ID can be put away or transferred to the location.

Setting Up PeopleSoft Inventory Structure Tables

To define item storage codes, use the Item Storage Codes (STORAGE_CODES) component. To define storage location types, use the Storage Location Types (STOR_LOC_TYPE) component. To define backlog reason codes, use the Backlog Reason Code (BACKLOG_RSN_INV) component. To define item packaging codes, use the Item Packaging Codes (PACKAGING_CODES) component. To define quarantine codes, use the Inventory Status Types (QUARANTINE_CODES) component. To define storage rules, use the Storage Rules (STOR_INSTRUCTIONS) component.

PeopleSoft Inventory structure tables store inventory information and facilitate enterprise-wide management and reporting for inventory and materials management activities. You must set up these core tables before you can perform tasks such as putting away items or fulfilling stock requests. Enter at least one complete set of tables, then share them across business units as needed.

See Also

Understanding Inventory Material Storage Structures

Pages Used to Set Up PeopleSoft Inventory Structure Tables

Defining Storage Location Types

Access the Storage Location Types page (Set Up Financials/Supply Chain, Product Related, Inventory, Storage Location Types).

Assign a code to each type of material storage location in your enterprise. Examples of storage location types include standard racking, liquid container storage, and tote storage.

Storage location type codes appear on the Material Storage Locations page, the Review Material Storage Loc page, and the Storage Locations report.

Defining Item Packaging Codes

Access the Item Packaging Codes page (Set Up Financials/Supply Chain, Product Related, Inventory, Item Packaging Codes).

You can assign packaging codes to items during material stock request or express issue creation. The Packing component uses these codes to provide packing instructions for shipment.

Defining Backlog Reason Codes

Access the Backlog Reason Codes page (Set Up Financials/Supply Chain, Product Related, Inventory, Backlog Reason Codes).

You can assign these codes to specific demand lines on the Shipping Backlogs page.

See Also

Viewing Shipment Backlogs

Defining Hold Codes

To create hold codes, use the Hold Codes component.

Access the Hold Codes page (Set Up Financials/Supply Chain, Product Related, Inventory, Hold Codes).

Use this page to define hold codes to be used during your business processes. Hold codes are used when:

• Putting demand lines on hold on the Cancel/Hold Stock Request page.

• Activating the Put on Hold option on the Inventory Definition - Business Unit Options: Shipping Options page.

• Automatically applied by the system during Financial Sanctions Screening functions (FSS).

Using this page, you can define one or more hold codes to be used by the Financial Sanctions Screening function. For Inventory, only one hold code can be used automatically by the FSS process. Define the code here, and then add the default hold code to the Installation Options - Inventory page to enable the Screen for Denied Parties Process (SCM_FSS) to review material stock requests (MSRs) and automatically apply the hold code to any MSR that fails to pass screening. A hold code prevents an MSR from shipping. You can manually add or remove a hold code from an MSR using the Cancel/Hold Stock Requests page.

See Also

Defining Packing and Shipping Options

Canceling or Holding Orders Within PeopleSoft Inventory

Validating Financial Sanctions

Defining and Maintaining Material Storage Locations

To define default ship staging locations, use the Default Ship Staging Location (DEFAULT_SHIP_LOC) component.

This section discusses how to define material storage locations and designate the locations for various purposes, including; ship staging locations, cross docking, pegging, VMI, and capacity checking.

See Also

Understanding Inventory Material Storage Structures

Pages Used to Define and Maintain Storage Locations

Defining Storage Areas

To create storage areas, use the Storage Areas component.

Access the Storage Areas page (Inventory, Maintain Storage Locations, Storage Areas).

Storage Level Display	Enter the number of levels for this storage area. The default value comes from the Inventory Options page; provided that no material storage locations have yet been defined for the area, you can override the default. The system uses the value defined here.
Closed	Select to close a storage area that is no longer active. When you save the page, PeopleSoft Inventory closes the storage area and all material storage locations that use the area. Important! Once you close the storage area, it is marked for deletion from the system, and you cannot reopen it.

See Also

Defining and Maintaining Material Storage Locations

Maintaining Material Storage Location Information

To define material storage locations, use the Material Storage Locations component (STOR_LOCATIONS_GBL).

Access the Material Storage Locations page (Inventory, Maintain Storage Locations, Material Storage Locations).

Note. If the Use External Warehouse Control option is active for the business unit, you should not make status changes on this page. Because status changes made here are not sent to the external warehouse application, the available and unavailable balances in PeopleSoft and the external warehouse application will no longer be synchronized.

Important! Changing the WIP, Nettable, Hold or Inspection options for a material storage location while material movement transactions are in process can result in misrepresentation of the reserved and available balances for items stored in that location. Only change these options when no other users are signed into the system.

See Also

Understanding Inventory Material Storage Structures

Establishing Putaway and Picking Zones

Storage Location Capacity Checking

Searching for Material Storage Locations

Managing Inventory Status

Understanding Directed Picking

Counting Inventory Stock

Defining PeopleSoft Inventory Business Unit Attributes

Integrating to Warehouse Management Systems

Setting Up Vendor Managed Inventory

Checking Storage Location Capacity

Access the Volume/Weight Capacity Checking page (Click the Capacity Check link on the Material Storage Locations page).

Capacity Check

The following options are only available if you have enabled capacity checking at the setID level. Default values come from the Inventory Options page.

Defining a Default Ship Staging Location

Access the Default Ship Staging Location page (Inventory, Maintain Storage Locations, Default Ship Staging Location).

Default Location Selection	To assign a new default staging location for shipments, enter the appropriate storage location search criteria, then click the Search button to display a list of all material storage locations.
	Click the Select Location button next to the storage location that you want to be the staging default for the shipments. The selected storage location appears in the Default Location group box.

See Also

Searching for Material Storage Locations

Understanding the Picking Process

Picking to Stage

Defining Default Cross Docking Locations

To define the default cross docking locations for a business unit, use the Default Cross Docking Staging Locations component.

Access the Default Cross Dock Locations page (Inventory, Maintain Storage Locations, Default Cross Dock Locations).

Type	Enter a default location type. For each business unit, you can assign one owned cross-dock type and one non-owned cross-dock type. You cannot use material storage locations that are defined as inspection locations as cross-dock locations.

Note. The cross-docking material storage locations entered here should not be defined as single-item locations.

See Also

Defining Cross Docking

Defining a Default Return to Vendor Location

Access the Return to Vendor Default Location page (Inventory, Maintain Storage Locations, Default RTV Location).

Define a default return to vendor (RTV) location for a business unit. The system uses this material storage location as the picking location for the RTV stock requests when no picking location is defined on the RTV ID created in PeopleSoft Purchasing. In most cases, this default RTV location is defined as your inspection area or the location where you place rejected stock.

Defining Default Pegging Locations

Access the Default Pegging Putaway Location Details page (Inventory, Maintain Storage Locations, Default Pegging Locations).

Define default material storage locations for the putaway of pegged receipts. Both an owned and non-owned material storage location can be defined for a business unit. The system uses the default pegged location if no material storage location is specified on the putaway transaction.

Note. It is highly recommended that you do not use the same material storage locations for pegged receipts and cross-docked receipts.

The pegged putaway, or supply, has been linked to a specific demand, such as an MSR or sales order. The system uses the default pegged location if no material storage location is specified on the putaway transaction.

Searching for Material Storage Locations

You can search for material storage locations from any page that has an editable storage location field.

To search for material storage locations:

1. Access the Storage Location Search page by clicking the Storage Location Search button next to an editable storage location field.

2. On the Storage Location Search page, enter a value at any level, then click the Search button.

   The first storage location field is for the storage area; the subsequent values correspond to the first, second, third, and fourth storage levels. You can search for material storage locations at any level without entering all the higher levels. For example, if you enter a value for the fourth level, the search returns all material locations containing that value. You can also use wildcards in the search.

3. Select the check box next to a material storage location to populate the location fields on the primary page with the selection.

Under certain circumstances, the system filters data before returning it to the Storage Location Search page. If you have already entered material storage locations on the page from which you are initiating the search, only the locations entered on the primary page appear on the page. In this case, you can remove the filter by clearing the entries in the search criteria fields and then click the Search button again. All material storage locations defined for the selected business unit now appear.

Filtering also occurs when you initiate a search from a primary page for which only particular material storage locations are valid. For example, searches initiated from the picking pages return only locations with quantity on hand, and searches from the putaway pages return only locations that meet selection criteria. If the business unit does not enable negative inventory, the Express Issue and Material Picking Feedback pages require that all material storage locations returned have available inventory balances for the selected item. These two pages require that locations contain inventory with Open or Restricted status levels. (When processing return-to-vendor transactions, however, the Express Issue page does allow the return of inventory stored in a location with a Hold or Rejected status.)

Note. Because PeopleSoft Inventory does not limit you to storing items at only one level, not all locations returned to the Storage Location Search page have the same level structure. If the selected item is stored exclusively at a certain level, however, the system displays only the storage areas containing that level.

You cannot search for closed material storage locations.

In addition to the above filters, you can further restrict the number of material storage locations initially displayed of the Storage Location Search page using the Initial Search Row Limit field on the Inventory page of the Installation Options component. If the search criteria information on the initial inventory page is incomplete, then a large number of material storage locations could be retrieved resulting in a delay to access the Storage Location Search page. Use the Initial Search Row Limit field to limit the initial display. Once you are on the Storage Location Search page, the search criteria are not limited by this field in order to allow broader searches for the correct material storage location. To prevent performance delays once you are on the Storage Location Search page be sure to enter enough search criteria before performing another search.

See Also

Understanding Inventory Material Storage Structures

Page Used to Search for Storage Locations

Viewing Material Storage Location Information

You can view information about material storage locations online or generate a report to use for visual verification of location attributes.

Pages Used to View Storage Location Information

Establishing Putaway and Picking Zones

To define item storage zone codes, use the Storage Zone Codes (ZONE_INV) component. Use the ZONE_INV_CI component interface to load data into the tables for this component.

To define zone assignments, use the Zone Assignments (STOR_ZONE_INV) component.

A zone represents a specific group of material storage locations. You can group material storage locations into putaway and picking zones, associate items with these zones, and assign each item-zone combination a priority. You can then optimize putaway and picking operations by enabling algorithms that consider a material storage location's zone assignment.

You define zone codes for a setID on the Storage Zone Codes page. Once zone codes are established, you assign material storage locations to picking or putaway zones in one of two places:

• On the Zone Assignments page.

  You can assign a zone code to a single material storage location or to a group of locations. For each material storage location that you select, specify whether the zone assignment is used for picking, putaway, or both. You can only make zone assignments for material storage locations already defined on the Material Storage Locations page.

• On the Storage Zone Assignments page (accessed from the Material Storage Locations page).

  When you define a material storage location on the Material Storage Locations page, you can transfer to the Storage Zone Assignments page to select a picking or putaway zone code for the location.

  Note. No matter which page you use, you can assign a given material storage location to two zones used for different purposes, one for putaway and one for picking. But you cannot assign the location to two zones used for the same purpose.

When you define item attributes for a business unit, you can use the Item Zone Assignments page to assign an item to a zone. For each putaway or picking zone that you associate with the item, you can specify the zone's priority. Directed putaway and picking algorithms that consider zone assignment select material storage locations from the zone with the highest priority.

See Also

Setting Up Putaway Defaults and Rules

Pages Used to Establish Putaway and Picking Zones

Making Zone Assignments

Access the Zone Assignments page (Inventory, Maintain Storage Locations, Zone Assignments).

Insert Storage Locations	To assign multiple material storage locations to a zone, enter the appropriate search criteria and click the Insert Locations button. If material storage locations have already been assigned to the zone, a message appears asking whether the locations that meet your criteria should replace or be added to the list of existing locations.
Assigned Storage Locations	Material storage locations already assigned to the zone appear in the grid. To insert a material storage location, add a row to the grid and enter the appropriate storage area and level information.
Putaway and Picking	For each material storage location that you assign to the zone, specify whether the zone assignment is for putaway or picking operations.

See Also

Searching for Material Storage Locations

Defining and Maintaining Containers

To define storage containers, use the Define Storage Container (CONTAINER_ID) component. To define container types, use the Container Types (CONTAINER_TYPE) component. To create container defaults, use the Container Defaults (CONTAINER_SETUP) component.

In PeopleSoft Inventory, you can create two kinds of containers: storage containers, which facilitate the storage and movement of stock within a business unit; and shipping containers, which consolidate stock for shipment. This section focuses on storage containers.

Placing stock into storage containers enables you to conduct a variety of business processes more efficiently. You can:

• Perform stock movements (receiving, putaway, transfers, picking, adjustments, and physical accounting) by container.

• Build containers of manufacturing completions from PeopleSoft Manufacturing.

• Display and update container information, including all containers for a specific item, all items in a specific container, and all containers for a specific lot.

If you have an electronic data collection system, you can also:

• Transfer items from one container to another.

• Remove all contents from a container.

• Place a storage container into a shipping container.

• Convert a storage container into a shipping container.

You define storage containers for loose stock only; that is, you cannot put a container into another storage container.

For each business unit, you can permit automatic container creation or require that containers be defined before use. In the former case, the system builds new containers during inventory transactions; in the latter, container IDs must exist before you can perform inventory transactions involving containers.

Note. If you are using an electronic data collection system and you do not permit automatic container creation, you can only put away or transfer stock into an existing container. To complete the transaction, you must add the container and then correct the error in the Transaction Maintenance component.

See Also

Packing Orders for Shipment

Shipping Containers

Working with Shipping Containers and Shipping Serial IDs Using an Electronic Data Collection System

Transferring Materials Using the Inventory Transfer EIP

Pages Used to Define and Maintain Containers

Establishing Container Defaults

Access the Container Types page (Inventory, Maintain Containers, Container Types, Container Types).

Before you can create either storage or shipping containers, you must establish default values for both the setID and the business unit. You can have a variety of container types; for example, you might use both cartons and pallets.

Container Types tab

Attributes tab

On the Container Defaults page, specify a default container type for each business unit and determine whether automatic container creation is permitted in the business unit.

If you do not define a default type, PeopleSoft Inventory automatically creates all new containers as multiple-item containers.

See Also

Single-Item Storage

Managing Inventory by Item Status

Creating Storage Containers

Access the Define Storage Container page (Inventory, Maintain Containers, Define Storage Container).

Use this page if the business unit requires the creation of containers before use, or to override default container values. If the business unit uses only one type of container, and the container does not require detailed attributes, you do not need to enter information here.

Maintaining Storage Containers

Access the Container Management page (Inventory, Maintain Containers, Container Management).

Storage Loc (storage location)	If this is a new container, define a material storage location for the container. If you are managing an existing container, the material storage location information appears. Because a container with quantity can exist in only one location, you cannot modify this information.
Include Zero Qty Locations (include zero quantity locations)	If the business unit allows negative quantities, select to display items with a quantity of zero.
Search link	Click to access the Container Selection Criteria page and search for items to add to the container.
Assigned Stock	Displays items currently stored in the container. To remove an item from the container, select its check box and click the Remove from Container button. the selections move to the Unassigned Stock section. When you remove an item, you can enter the item's new material storage location in the Assigned Stock section. This type of movement is similar to an item transfer.
Unassigned Stock	Displays items matching the search criteria. To add an item to the container, select its check box and click the Add to Container button. the selections move to the Assigned Stock section.

Note. You can only move items with available quantity. You can, however, move partial quantities of items, and if negative inventory is allowed, you can choose more than the quantity available by selecting the check box next to a line and overriding the quantity available). In addition, you must move owned items into owned material storage locations and non-owned items into non-owned material storage locations. Finally, to move the entire storage container to a new material storage location, use the Transfers component in the Maintain Inventory menu.

See Also

Searching for Material Storage Locations

Making Stock Quantity Adjustments and Transfers Within the Business Unit