JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Oracle Solaris Cluster 4.1 Hardware Administration Manual     Oracle Solaris Cluster 4.1
search filter icon
search icon

Document Information

Preface

1.  Introduction to Oracle Solaris Cluster Hardware

2.  Installing and Configuring the Terminal Concentrator

3.  Installing Cluster Interconnect Hardware and Configuring VLANs

4.  Maintaining Cluster Interconnect Hardware

5.  Installing and Maintaining Public Network Hardware

6.  Maintaining Platform Hardware

Mirroring Internal Disks on Servers that Use Internal Hardware Disk Mirroring or Integrated Mirroring

How to Configure Internal Disk Mirroring After the Cluster Is Established

How to Remove an Internal Disk Mirror

Configuring Cluster Nodes With a Single, Dual-Port HBA

Risks and Trade-offs When Using One Dual-Port HBA

Supported Configurations When Using a Single, Dual-Port HBA

Cluster Configuration When Using Solaris Volume Manager and a Single Dual-Port HBA

Configuration Requirements

Expected Failure Behavior with Solaris Volume Manager

Failure Recovery with Solaris Volume Manager

Cluster Configuration When Using Solaris Volume Manager for Oracle Solaris Cluster and a Single Dual-Port HBA

Expected Failure Behavior with Solaris Volume Manager for Oracle Solaris Cluster

Failure Recovery with Solaris Volume Manager for Oracle Solaris Cluster

Kernel Cage DR Recovery

Preparing the Cluster for Kernel Cage DR

How to Recover From an Interrupted Kernel Cage DR Operation

7.  Campus Clustering With Oracle Solaris Cluster Software

8.  Verifying Oracle Solaris Cluster Hardware Redundancy

Index

Chapter 6

Maintaining Platform Hardware

This chapter contains information about node hardware in a cluster environment. It contains the following topics: