$ rmformat
The following example shows the output of the command after you connect a storage device.
$ rmformat Looking for devices... 1. Logical Node: /dev/rdsk/c3t0d0p0 Physical Node: /pci@0,0/pci108e,534a@2,1/storage@3/disk@0,0 Connected Device: SanDisk Cruzer Micro 0.3 Device Type: Removable Bus: USB Size: 245.0 MB Label: <None> Access permissions: Medium is not write protected.
Use one of the following commands:
ls /media/NONAME
For example:
$ ls /media/NONAME aa bb
rmmount –l
For example:
$ rmmount -l /dev/dsk/c3t0d0p0:1 rmdisk0,NONAME,/media/NONAME