Configuring the iSNS Server
You can configure the iSNS server using as described in the
following task maps and sections.
|
|
1. Accept the default properties of the iSNS server or change them.
|
|
A. Notification of state changes of the server
|
|
|
B. Number of attempts to determine a client's availability
|
|
|
C. Location of file that stores client data.
|
|
2. Enable the iSNS server and display the settings.
|
|
3. Register all clients with the iSNS server.
|
Use the client's management interface's iSCSI configuration function to specify the IP address
of the iSNS server and to allow discovery.
|
4. Enable the default discovery domain set.
|
|
|
After these tasks, the iSNS server is operating in a minimal manner. All of
the clients are in the default discovery domain and are unassigned. Each client can identify and get
access to all of the other clients.
5. Create the discovery domain sets for your site.
|
|
6. Create the discovery domains for your site.
|
|
7. Add each discovery domain to one or more discovery domain set.
|
|
8. Assign clients to one or more discovery domains.
|
|
9. Verify the membership of clients in discovery domains and the membership of discovery
domains in discovery domain sets.
|
|
|