Attach the Multi-Port Dongle Cable

Document Information

Using This Documentation

Service Manual Overview

About the Sun Blade X4-2B

Product Description

About Front and Rear Panels

Front Panel Features

Front Panel Indicators and Buttons

Location of Front Panel Indicators and Buttons

Locate Indicator Button

Ready To Remove Indicator

Service Action Required Indicator

Power OK Indicator and Button

NMI Button

Rear Panel of the Server Module

UCP and the Multi-Port Dongle Cable

Attach the Multi-Port Dongle Cable

About the Chassis

The System Chassis

The Chassis Monitoring Module (CMM)

About Oracle ILOM

About System Components

Illustrated Parts Breakdown

Replaceable Components (FRUs and CRUs)

Component Serviceability

Troubleshooting the Server Module

Preparing for Service

Servicing Server Module Components

Returning the Server Module to Operation

BIOS Power-On Self-Test (POST) Checkpoints

BIOS Setup Utility Menu Options

Index

Attach the multi-port dongle cable to the front of the server module using the universal connector port (UCP).

Note - The port does not provide a means to permanently attach the multi-port dongle cable. The connection is intended for temporary usage. Disconnect the cable when finished.

Position the multi-port cable connector so the flat side of the connector aligns with the flat side of the UCP.
Gently squeeze the sides of the multi-port cable connector and insert the multi-port cable into the UCP.
Connect the devices using the appropriate interfaces.
For an overview of the available interfaces on the multi-port cable, see UCP and the Multi-Port Dongle Cable.

Caution - Component damage. When not in use, do not leave the cable attached to the server module. The multi-port cable is designed for temporary use.
To disconnect the multi-port cable, gently squeeze the sides of the cable connector and pull it away from the server module.

Skip Navigation Links
Exit Print View
	Sun Blade X4-2B Service Manual