Front Panel Indicators and Buttons
Location of Front Panel Indicators and Buttons
Rear Panel of the Server Module
UCP and the Multi-Port Dongle Cable
Attach the Multi-Port Dongle Cable
The Chassis Monitoring Module (CMM)
Replaceable Components (FRUs and CRUs)
Troubleshooting the Server Module
Servicing Server Module Components
Returning the Server Module to Operation
BIOS Power-On Self-Test (POST) Checkpoints
The topics included in this section show the location of the Sun Blade X4-2B front panel indicators and buttons and describe their functions.
The following illustration shows the server module front panel indicator and button locations.
|
Detailed descriptions and functions follow.
Function:
Combination white indicator and button.
Activate the Locate Indicator remotely from Oracle ILOM to identify a server module within a chassis.
Press and hold the Locate Indicator button to activate the front panel lamp test.
Function:
Blue indicator.
Indicates when it is safe to remove the server module from the chassis.
Off: Normal operation. Do not remove the server module.
On solid: The server module is ready to remove. See Remove the Server Module from the Sun Blade Chassis.
Function:
Amber LED.
Indicates a server module component fault.
Off: Normal operation.
On solid: The server module has a fault. See Troubleshooting the Server Module.
Function:
Green Indicator and recessed button.
Use the Power button to toggle the server between standby power and full power states.
Use a stylus to operate the Power button.
The Power/OK Indicator shows the status of the server power:
Service processor is booting: Fast blink
Host is booting: Slow blink at 1 Hz.
Standby power state (SP booted): Blink 0.2 seconds on, 2.8 seconds off
Full power state: On solid (does not blink)
For more information, see About Server Power States and Resets.
Function:
The NMI (non-maskable interrupt) button is for service use only. Do not press.
See Also: