Install the Server Module Top Cover

Document Information

Using This Documentation

Service Manual Overview

About the Sun Blade X4-2B

Troubleshooting the Server Module

Preparing for Service

Servicing Server Module Components

Returning the Server Module to Operation

Return the Server Module to Operation

Install the Server Module Top Cover

Remove Server Module Filler Panel

Install the Server Module in the Chassis

Powering On the Server Module

Power On Using the Power Button

Power On (Oracle ILOM SP CLI)

Power On (Oracle ILOM SP Web Interface)

Clear Server Module Faults

BIOS Power-On Self-Test (POST) Checkpoints

BIOS Setup Utility Menu Options

Index

Caution - Over-temperature condition. The server module cover must be in place for proper airflow. Never attempt to run the server module with the cover removed. Equipment damage possible. Hazardous voltage present.

Place the cover on the server module allowing approximately 0.5 inch (12 mm) to extend over the rear of the chassis.
Slide the top cover toward the front of the server module chassis until it locks into place.
Ensure that you slide the cover under the tabs at the front of the server module.
Gently press down on the cover to engage it with the server module chassis.

Next Steps

Install the Server Module in the Chassis

Skip Navigation Links
Exit Print View
	Sun Blade X4-2B Service Manual