Go to main content

Oracle® ILOM Security Guide For Firmware Releases 3.x and 4.x

Exit Print View

Updated: May 2019
 
 

Limit Viewable KVMS Sessions for Remote System Console Plus (3.2.4 or later)

As of firmware release 3.2.4, a primary Remote System Console Plus user can prevent other signed-in session users on the SP from viewing confidential data entered during a video redirection session by limiting the Maximum Client Session Count to one (1) session viewer. By default, the Maximum Client Session Count property for the Oracle ILOM Remote System Console Plus is set to four sessions viewers.

To modify the Maximum Client Session Count property for the Oracle ILOM Remote System Console Plus, see the following web-based instructions.

Before You Begin

  • The KVMS Maximum Client Session Count property for the Oracle ILOM Remote System Console Plus is available as of firmware release 3.2.4 or later.


    Note - The KVMS Maximum Client Session Count property is not configurable on systems supporting the Oracle ILOM Remote Console.
  • The Oracle ILOM Remote System Console Plus is only available on newly released SP systems as of firmware release 3.2.1.

  • The Console (c) role is required in Oracle ILOM to modify the KVMS Maximum Client Session Count property.

  • Upon resetting the Maximum Client Session Count property in Oracle ILOM, all active Oracle ILOM Remote System Console Plus video sessions on the SP will be terminated.

  • By default, a maximum of four Remote System Console Plus video redirection sessions, per SP, can be launched from the Redirection page in Oracle ILOM.

  1. Navigate to the KVMS page in the Oracle ILOM web interface by clicking Remote Console -> KVMS.
  2. In the KVMS page, modify the Maximum Client Session Count property (acceptable value: 4 (default)|1|2|3).
  3. Click Save to apply the change.

Related Information

  • Remote Device Redirection Properties, Oracle ILOM Administrator's Guide for Configuration and Maintenance (Firmware 3.2.x)