ZS3-2 Clustered to Mixed Disk Shelves

ZS3-2 Clustered to Mixed Disk Shelves (1 HBA)

The following figures show a subset of the supported configurations for Oracle ZFS Storage ZS3-2 clustered controllers with one HBA. To cable the controller to the disk shelves, use the Cabling Guidelines, which include the Maximum Number of Disk Shelves per Controller Configuration.

Using mixed disk shelves on a controller, requires the following:

• The controller must use only 4X4 port SAS-2 HBAs

• Do not use mixed disk shelves in the same chain

Figure 5-47  ZS3-2 clustered controllers with one HBA connected to two mixed disk shelves in two chains (DE2-24 shown on the left)

Figure 5-48  ZS3-2 clustered controllers with one HBA connected to multiple mixed disk shelves in two chains (DE2-24 shown on the left)

ZS3-2 Clustered to Mixed Disk Shelves (2 HBAs)

The following figures show a subset of the supported configurations for Oracle ZFS Storage ZS3-2 clustered controllers with two HBAs. To cable the controller to the disk shelves, use the Cabling Guidelines, which include the Maximum Number of Disk Shelves per Controller Configuration.

Using mixed disk shelves on a controller, requires the following:

• The controller must use only 4X4 port SAS-2 HBAs

• Do not use mixed disk shelves in the same chain

Figure 5-49  ZS3-2 clustered controller with two HBAs connected to two mixed disk shelves in two chains (DE2-24 shown on the left)

Figure 5-50  ZS3-2 clustered controller with two HBAs connected to three mixed disk shelves in three chains (DE2-24 shown on the left)

Figure 5-51  ZS3-2 clustered controller with two HBAs connected to four mixed disk shelves in four chains (DE2-24 shown on the left)

Figure 5-52  ZS3-2 clustered controller with two HBAs connected to eight mixed disk shelves in four chains (DE2-24 shown on the left)