Go to main content
Oracle® Server X5-2L Installation Guide for Oracle Solaris Operating System

Exit Print View

Updated: May 2015
 
 

Set Up the Remote Console

  1. View or establish an IP address for the server SP.

    To log in to Oracle ILOM remotely using either the command-line interface (CLI) or the web interface, you must know the IP address of the server SP. For instructions on determining the server's IP address, refer to Viewing or Modifying the Service Processor Network Settings in Oracle Server X5-2L Installation Guide .

  2. If you are using a web-based client connection, perform these steps; otherwise go to the next step.
    1. In a web browser, type the IP address for the server SP.
    2. Log in to the Oracle ILOM web interface.

      The default Oracle ILOM user name is root and the default password is changeme.

      The Oracle ILOM Summary Information page appears.

    3. Redirect the video output from the server to the web client by launching the Oracle ILOM Remote System Console Plus application.
  3. If you are using an SSH client connection, perform these steps.
    1. From a serial console, establish an SSH connection to the server SP. Type: ssh root@hostname, where hostname can be the DNS name or the IP address for the server SP.
    2. Log in to Oracle ILOM.

      The default Oracle ILOM is root and the password is changeme.

    3. Redirect the serial output from the server to the SSH client. Type:

      -> start /HOST/console

Related Information