Go to main content
Oracle® Server X5-2L Installation Guide for Oracle Solaris Operating System

Exit Print View

Updated: May 2015
 
 

Before You Begin

Ensure that the following requirements are met:

  • If you want to configure RAID (redundant array of independent disks) on the server's storage drives, you must do so before you install the operating system. For instructions for configuring RAID, refer to Configuring Server Drives for OS Installation in Oracle Server X5-2L Installation Guide .


    Note -  If you are using the Oracle Storage 12 Gb/s SAS PCIe RAID HBA Internal to manage your storage drives, you must create a RAID volume and make it bootable before installing the operating system; otherwise, the HBA will not be able to identify the server's storage drives.
  • Verify that the UEFI firmware settings are set to the optimal defaults. For instructions on how to verify and, if necessary, set the UEFI firmware settings, see Verify the UEFI Optimal Defaults.

  • Set the UEFI firmware to the desired boot mode, Legacy BIOS or UEFI. For instructions on how to set the UEFI boot mode, see Set the Boot Mode.

  • Select and set up the console display option prior to performing the installation. For more information about this option and setup instructions, see Selecting the Console Display Option.

  • Select and set up the boot media option prior to performing the installation. For more information about this option and setup instructions, see Selecting the Boot Media Option.

  • Identify and set up the storage drive to be used as the installation target option prior to starting this installation procedure. For more information about this option and setup instructions, see Selecting the Installation Target Option.

  • Gather the Oracle Solaris operating system documentation so that you can use it in conjunction with the instructions provided in this section. Oracle Solaris OS documentation is available at:

    For Oracle Solaris 11.2 documentation: http://docs.oracle.com/cd/E36784_01/index.html