The server is equipped with Unified Extensible Firmware Interface (UEFI), which supports both legacy BIOS and UEFI boot modes. Legacy BIOS boot mode is enabled by default.
Oracle VM Server does not support UEFI boot mode. Therefore, you must ensure that the boot mode is set to legacy BIOS. To determine or change the boot mode, see the following procedure.
For instructions, see Accessing the Host Console.
For example, to reset the server, do one of the following:
From the local server, press the Power button on the front panel of the server (for approximately 1 second) to power off the server, and then press the Power button again to power on the server.
From the Oracle ILOM web interface, select Host Management → Power Control, and then select Reset from the Select Action list box.
From the Oracle ILOM command-line interface, type reset /System.
The server begins the boot process, and the BIOS screen appears.
After a few moments, the BIOS Setup Utility appears.
The Boot menu appears. The UEFI/BIOS Boot Mode field displays the current boot mode.