从 Oracle® Solaris 10 转换至 Oracle Solaris 11.2

退出打印视图

更新时间: 2014 年 12 月
 
 

ndd 命令与 ipadm 命令进行比较

    ndd 命令相比,ipadm 命令具有以下优势:

  • 提供了有关每个 TCP/IP 属性的信息,如属性的当前和缺省值以及可能值的范围。因此,更容易获得调试信息。

  • 遵循一致的命令语法,因此更易于使用。

  • 路由和传输层可调参数的持久性配置,通过使用 ipadm 子命令而非先前需要的未提交的 ndd 命令(这些未提交的命令需要使用定制 SMF 脚本或 /etc/rc*.d 脚本)来实现。

下表将选定 ndd 命令选项与等效的 ipadm 命令选项进行比较。有关更完整的命令选项列表,请参见 ipadm(1M) 手册页。

表 7-2  ndd 命令与 ipadm 命令进行比较
ndd 命令
ipadm 命令
bash-3.2# ndd -get /dev/ip ?
ip_def_ttl         (read and write)
ip6_def_hops       (read and write)
ip_forward_directed_broadcasts
                   (read and write)
ip_forwarding      (read and write)
...
...
bash-3.2# ndd -get /dev/ip \
ip_def_ttl
100
bash-3.2# ndd -get /dev/ip \
ip6_def_hops
255
bash-3.2# ndd -get /dev/tcp ?
tcp_cwnd_max       (read and write)
tcp_strong_iss     (read and write)
tcp_time_wait_interval
                   (read and write)
tcp_tstamp_always  (read and write)
tcp_tstamp_if_wscale
                   (read and write)
...
bash-3.2# ndd -get /dev/tcp ecn
1
bash-3.2# ndd -get /dev/tcp sack
2

bash-3.2# ipadm show-prop ip
PROTO PROPERTY     PERM   CURRENT  PERSISTENT   DEFAULT   POSSIBLE
ipv4  forwarding   rw     off      --           off       on,off
ipv4  ttl          rw     255      --           255       1-255
ipv6  forwarding   rw     off      --           off       on,off
ipv6  hoplimit     rw     255      --           255       1-255
...
bash-3.2# ipadm show-prop -p ttl,hoplimit ip
PROTO PROPERTY   PERM   CURRENT   PERSISTENT   DEFAULT   POSSIBLE
ipv4  ttl        rw     255       --           255       1-255
ipv6  hoplimit   rw     255       --           255       1-255
bash-3.2# ipadm show-prop tcp
PROTO PROPERTY        PERM CURRENT PERSISTENT DEFAULT    POSSIBLE
tcp   ecn             rw   passive --         passive    never,passive,
                                                         active
tcp   extra_          rw   2049    2049,4045  2049,4045  1-65535
      priv_ports
tcp   largest_        rw   65535   --         65535      1024-65535
      anon_port
tcp   recv_           rw   128000  --         128000     2048-1073741824
      maxbuf
tcp   sack            rw   active  --         active     never,passive,
                                                         active
tcp   send_           rw   49152   --         49152      4096-1073741824
      maxbuf
tcp   smallest_       rw   32768   --         32768      1024-65535
      anon_port
tcp   smallest_       rw   1024    --         1024       1024-32768
      nonpriv_port
...
bash-3.2# ipadm show-prop -p ecn,sack tcp
PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT  POSSIBLE
tcp   ecn      rw   passive --         passive  never,passive,active
tcp   sack     rw   active  --         active   never,passive,active