Basic SEFOS IPv6 Topology

Language:

This illustration depicts a basic Oracle's SEFOS IPv6 topology that is referenced in this guide. In this topology, two switches (switch 1 and switch 2) are connected to each other over port 0/3 (P3). Host A and host B are connected through port 0/1 to their respective switches. Finally, three VLANs are enabled. VLAN 3 connects the two switches, and VLAN 1 and VLAN 2 connect the hosts to the switches.

image:Figure showing basic example IPv6 topology

The following table lists the IPv4 and IPv6 addresses of the interfaces and hosts shown in the example topology.

Switch or Host	Interface	IPv4 Address and Mask	IPv6 Address and Prefix Length
Switch 1	`VLAN 1`	`11.0.0.1` / `255.0.0.0`	`fec0::1111:0:1` / `96`
Switch 1	`VLAN 3`	`33.0.0.1` / `255.0.0.0`	`fec0::3333:0:1` / `96`
Switch 2	`VLAN 2`	`22.0.0.2` / `255.0.0.0`	`fec0::2222:0:1` / `96`
Switch 2	`VLAN 3`	`33.0.0.2` / `255.0.0.0`	`fec0::3333:0:2` / `96`
Host A		`11.0.0.10` / `255.0.0.0`	`fec0::1111:0:10` / `96`
Host B		`22.0.0.20` / `255.0.0.0`	`fec0::2222:0:20` / `96`