如果打算通过 SP 的 NET MGT 端口连接到 SP,SP 必须具有有效的 IP 地址。
默认情况下,服务器配置为通过网络中的 DHCP 服务获取 IP 地址。如果服务器所连接的网络不支持使用 DHCP 进行 IP 寻址,请执行此过程。
如果尚未通过 SER MGT 端口连接,请根据需要执行将终端或仿真器连接到 SER MGT 端口中的步骤。
->set /SP/network pendingipdiscovery=static Set 'pendingipdiscovery' to 'static'
->set /SP/network pendingipaddress=service-processor-IPaddr Set 'pendingipaddress' to 'service-processor-IPaddr'
-> set /SP/network pendingipgateway=gateway-IPaddr Set 'pendingipgateway' to 'gateway-IPaddr'
-> set /SP/network pendingipnetmask=255.255.255.0 Set 'pendingipnetmask' to '255.255.255.0'
本示例中设置的网络掩码是 255.255.255.0。在您的网络环境中,子网可能需要一个不同的网络掩码。请使用最适合您环境的网络掩码。
此示例显示了已设置为用于将 SP 从 DHCP 配置转换为静态配置的参数。
-> show /SP/network -display properties /SP/network Targets: Properties: commitpending = (Cannot show property) dhcp_clientid = xxx.xxx.xxx.xxx dhcp_server_ip = xxx.xxx.xxx.xxx ipaddress = xxx.xxx.xxx.xxx ipdiscovery = dhcp ipgateway = xxx.xxx.xxx.xxx ipnetmask = 255.255.255.0 macaddress = xx:xx:xx:xx:xx:xx managementport = MGMT outofbandmacaddress = xx:xx:xx:xx:xx:xx pendingipaddress = service-processor-IPaddr pendingipdiscovery = static pendingipgateway = gateway-IPaddr pendingipnetmask = 255.255.255.0 pendingmanagementport = MGMT sidebandmacaddress = xx:xx:xx:xx:xx:xx state = enabled ->
-> set /SP/network commitpending=true Set 'commitpending' to 'true'
请参见配置预先安装的 OS。
服务器管理
Oracle ILOM 文档