Standard MT Cables
The most common connector for QDR is the Standard MT cables, with standard MT ferrules
which are black in color and function by way of physical contact between fiber
tips.
This table identifies Standard MT cable end types by the features of ferrule type,
shell color, alignment method, and describes what that cable end type connects with.
|
|
|
|
|
4x MPO optical cable
|
Standard MT
|
Aqua
|
Post and hole
|
QDR 4x transceivers, for example, QSFP+ 40GBASE-SR4 transceivers
|
4x MPO optical cable
|
Standard MT
|
Black
|
Post and hole
|
QDR 4x Transceivers, for example, QSFP+ 40GBASE-SR4 transceivers
|
|
Note -
Some supported cables have a Standard MT connector on one end and a PrizmMT MPO
connector on the other. Pay close attention when connecting this cable, to identify
which connector is which, and not confuse the two.
Oracle supplies IB cables that are supported with this adapter. For more information,
see the product web page at https://www.oracle.com/networking/dual-port-qdr-infiniband-adapter-m4/index.html.
Visually comparing the design of the three cables, note the differences between the
Standard MT MPO cable on the left, and the PrizmMT MPO cables in the middle and on the
right.
|
|
1
|
Aqua colored shell (Standard MT MPO)
|
2
|
Standard ferrule (Standard MT MPO)
|
3
|
Alignment pin holes (Standard MT MPO)
|
4
|
Contact type optical fibers (Standard MT MPO)
|
5, 10
|
Magenta and black colored shell (PrizmMT MPO)
|
6, 11
|
Prizm ferrule (PrizmMT MPO)
|
7, 12
|
Alignment post (PrizmMT MPO)
|
8, 13
|
Focused optical fiber array (PrizmMT MPO)
|
9, 14
|
Alignment hole (PrizmMT MPO)
|
|