Verify the Adapter Installation (Oracle Linux)

1. In stall the adapter in the server.

   See Install the Adapter.

2. Verify that the adapter is viewed through the PCIe interface and determine the adapter type.

   # lspci -d :2088 -v
   13:00.0 Infiniband controller: Oracle/SUN Device 2088 (rev 03)
           Subsystem: Oracle/SUN Device 6278
           Physical Slot: 4
           Flags: bus master, fast devsel, latency 0
           Memory at 383ff8104000 (64-bit, prefetchable) [size=16K]
           Memory at 383ff0000000 (64-bit, prefetchable) [size=128M]
           Memory at 383ff8100000 (64-bit, prefetchable) [size=16K]
           Expansion ROM at c7100000 [disabled] [size=1M]
           Capabilities: [40] Power Management version 3
           Capabilities: [70] Express Endpoint, MSI 00
           Capabilities: [b0] MSI-X: Enable+ Count=48 Masked-
           Capabilities: [100] Advanced Error Reporting
           Capabilities: [148] Alternative Routing-ID Interpretation (ARI)
           Capabilities: [158] #19
           Capabilities: [188] Single Root I/O Virtualization (SR-IOV)
           Capabilities: [1c8] Transaction Processing Hints
           Capabilities: [298] Address Translation Service (ATS)
           Kernel driver in use: sif
   

Related Information

• Cable Cautions

• Install the Adapter

• Standard MT Cables

• Verify the Adapter Installation (Oracle Solaris)

• Remove the Adapter