The program description deals with the following:
The data for an SAM customer display (SAMSUNG) can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
The interface and the link to a processing unit should be defined in addition to the device-specific data of the SAM customer display.
The following description deals with all available options for update of this basic data.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the debug levels offered by clicking onto this field and with a second click choosing the debug level required.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for the debug level if
a protocol is required for error analysis. Details are found in file
"errlog" in directory work
of the appropriate system unit.
Field with firmly defined selection options
Select one of the brightness settings offered by clicking onto this field and choosing the required value with a second click.
The system offers the following settings:
Field with firmly defined selection options
Select one of the operation modes offered by clicking onto this field and with a second click selecting the operation mode required.
The system offers the following operation modes:
Entry range permitted: numeric 0 - 9
Enter the number of the line which is to be used for start scroll.
Entry range permitted: numeric 0 - 9
Enter the number of the line to be used for the end scroll. The value entered here should be higher than the value of the start scroll sector.
Switch active: The Euro character set code
page is active
Switch deactivated: The Euro
character set code page is deactivated