The program description deals with the following:
The data for an MICROS Retail LCD display can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
The interface and the link to a processing unit must be defined and the device-specific operating mode of the device set. The device should also be stored under an easily identifiable device no. in the system.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking on this field and with a second click confirming the selection.
The system offers the following debug level:
Note:
Only select a value higher than "0" for the debug level if
a protocol for the communication of the device is required for error analysis.
The details are shown in file "errlog" in directory work of the appropriate system unit.
Field with firmly defined selection options
Select one of the offered screen modes by clicking on this field and with a second click confirming the selection.
The system offers the following settings:
Field with firmly defined selection options
Select one of the offered operating modes by clicking on this field and with a second click confirming the selection.
The system offers the following settings:
Entry range permitted: numeric 1 - 99
Enter the number of the line to be used for the start of the scroll sector.
Entry range permitted: numeric 1 - 99
Enter the number of the line to be used for the end of the scroll sector. The value entered here must be higher than the value entered for the start scroll sector.
Switch active: This device supports a
firmware version older than April
2001
Switch deactivated: This device
supports a firmware version younger
than April 2001