The program description deals with the following:
The data for connection of a device of type Giro EFT can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
EFT devices are needed for payments with magnetic cards.
The following describes all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Default = 1
Field with firmly defined selection options
Select one of the debug levels offered by clicking onto this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol of the communication of the Giro EFT device is
required for error analysis. The details are shown in file "errlog"
in directory work
of the appropriate system unit.
Field with firmly defined selection options
Select one of the baud rates offered by clicking onto the field and with a second click confirming the selection.
The system offers the following baud rates:
Please note that the baud rate permitted must match up to the setting of the connected Giro EFT device.
Default = 30000
Default = 30000
Default = 5000