The program description deals with the following:
The data for connection of a device of type GiroVend EFT can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can be displayed for information.
EFT devices are needed for payment by magnetic card.
The following description deals with all available options for update of this basic data.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the baud rates offered by clicking onto this field and with a second click confirming the selection.
The system offers the following baud rates:
Please note that the baud rate permitted must match up with the setting of the connected Giro EFT device.
Field with firmly defined selection options
Select one of the debug levels offered by clicking onto this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol for the communication of a GiroVend EFT device is required for error
analysis. The details are shown in file "errlog" in directory work of the appropriate system unit.
Default = 1
Default = 2
Enter the number of decimal places in this field.
Default = 2
Enter the maximum number of retry attempts permitted.
Default = 0
Enter a value for the mode in this field (see Operation Manual of this device).