The program description deals with the following:
The data for a Nippon Primex printer can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can be displayed for information.
The interface and link to a processing unit should be defined and the device-specific operating mode set.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking onto this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol for communication of the printer is required for
error analysis.
Field with firmly defined selection options
Select one of the offered printer types by clicking onto this field and with a second click confirming the selection.
The system offers the following printer types:
Default 3
Default 32
Field with firmly defined selection options
Select one of the offered baud rates by clicking onto this field and with a second click confirming the selection.
The system offers the following baud rates:
Field with firmly defined selection options
Select one of the offered modes for the parity bit by clicking onto this field and with a second click confirming the selection.
The system offers the following settings:
Default 100
Default 2000
Default 2000
Field with firmly defined selection options
Select one of the offered options by clicking onto this field and with a second click confirming the selection.
The system offers the following modes:
Field with firmly defined selection options
Select one of the offered solutions for print by clicking onto this field and with a second click confirming the selection.
The system offers the following:
Switch active:
Inverted logo print
Switch deactivated: Normal print
of logo
Path and name of BMP file for logo print
A logo can be printed on the receipt instead of the heading lines. If this feature is required, the name of the BMP file and the path in relation to the current working directory should be entered (e.g. working directory = work.10, BMP file in directory xpm; entry = ../xpm/BMP file name)
Please note the following information for BMP files:
A BMP file is created with the appropriate program (e.g. "PAINT" for Windows). A colour depth of 1 bit (=2 colours) should be selected.
The size and ratio of the X/Y solution in Pixel is dependent on the printer on which the logo is to be printed.
The following apply to printers: