The program description deals with the following:
The data for an OPOS Dallas key can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
Enter the number of the device under which it is to be stored in the system. The interface and link to a processing unit should be defined and the device-specific operating mode set.
Note:
99 = zero should be selected as
device interface for all OPOS devices.
The OPOS module must have been installed and configured to operate the OPOS devices.
Click on the
graphic for further help with programming an OPOS Device.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Entry range permitted: alphanumeric max. 30 chars.
Enter the service name of this OPOS device.
The service names are listed in program regedit. Open the registration database of Windows NT and confirm the name of this device under key HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\ ServiceOPOS\*
Click on the
graphic for further help with programming an OPOS Device.
Entry range permitted: alphanumeric max. 30 chars.
Enter the device name of this OPOS device.
The device names are listed in program regedit. Open the registration database of Windows NT and confirm the name of this device under key HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\ ServiceOPOS\* Standard "xxxxxx".
Click on the
graphic for further help with programming an OPOS Device.
Entry range permitted: numeric 0 - 255
Select one of the offered debug levels by clicking onto this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol of communications is required for error analysis.
The details are shown in file "errlog" in directory work
of the appropriate system unit.
Button active: Multithreaded
is switched on
Button deactivated: Multithreaded is switched off
This option is dependent on the connected device and must be activated or deactivated accordingly.