OPOS Fiscal printer

The program description deals with the following:

Remarks on Program function
Remarks on Data fields
Use Index to find the field details required.

Remarks on program function

The data for an OPOS printer can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.

The interface and link to a processing unit should be defined and the device-specific operating mode set.

Note:
99 = zero should be selected as device interface for all OPOS devices.

The OPOS modules must have already been installed and configured if OPOS devices are to be operated.

Click on the graphic for further help with programming of OPOS Devices.

Remarks on data fields

The following description deals with all available options for update of this basic data basic data.

As with nearly all other programs the following also applies here:

The entry mask for this program may differ in your MICROS Retail OSCAR POS program. Some data fields may be missing.
There may be defaults or firmly defined selection options for some data fields. These cannot be updated in the current program.
Fields with enforced entry defined are to be found in the entry masks as are fields where entry is optional.
If the data record is updated over several pages of entry masks, the dialog window is reached by clicking onto the appropriate button with <Mouse key 1>.
The same procedure also applies to call up of another update program from this program.
In some cases you may find so-called "Switches" which are activated or deactivated by the user with <Mouse key 1>, depending on the setting. Activated switches have a dark top, deactivated switches are lighter.

Device name

Entry range permitted: alphanumeric max. 30 chars.

Enter the device name of this OPOS device.

Exmple

The OPOS modules are entered as follows in the registration database:

· HKEY_LOCAL_MACHINE\SOFTWARE\OLEforRetail\ ServiceOPOS\Gerätegruppe\Gerätename

The device names are listed in program regedit.

Click on the graphic for further help with programming of OPOS Devices.

Printer model

Field with firmly defined selection options

Select one of the offered printer models by clicking on this field and with a second click confirming the selection.

The system offers the following printer models:

0 = DvOposUposFTP260FV

1 = DvOposEltradeT81

Debug

Entry range permitted: numeric, 1 - 255

Only select a value higher than "0" for the debug level if a protocol of the communications is required for error analysis. The details are shown in file "errlog" in directory work of the appropriate system unit.