Scanner
The
program description deals with the following:
The
data for connection of a scanner via the OCIA interface (hand-held scanner) can
be updated, i.e. programmed, changed or cleared, with this program. Data which
has already been stored can be displayed for information.
This
device is connected to the OCIA interface of the POS board.
The
following description deals with all available options for update of this basic
data.
As
with nearly all other programs the following also applies here:
- The entry mask for this program
may differ in your MICROS Retail OSCAR POS program. Some data fields may be missing.
- There may be defaults or firmly defined selection
options for some data fields. These cannot be updated in the current
program.
- Fields with enforced entry defined are to be
found in the entry masks as are fields where entry is optional.
- If the data record is updated over several pages
of entry masks, the dialog
window is reached by clicking on the
appropriate button with <Mouse key 1>.
- The same procedure also applies to call up of
another update program from this program.
- In some cases you may find so-called
"Switches" which are activated or deactivated by the user with
<Mouse key 1>, depending on the setting. Activated switches have a dark
top, deactivated switches are lighter.
Field with firmly defined selection options
Select
one of the offered debug levels by clicking on this field and with a second
click confirming the selection.
The
system offers the following:
- 0 = no protocol of data communication in file
"errlog"
- 1 =
- 2 =
- 3 = display all communication data in file
"errlog"
Note:
A value higher than 0 should be selected for the
debug level if a protocol of the communication of the scanner is required for
error analysis. The data can be found in file "errlog" in directory work of the appropriate system unit.
MICROS Retail Deutschland GmbH
Salzufer 8
D-10587 Berlin