The program description deals with the following:
The data for the configuration of a scales, type Stathmos, can be updated, i.e. programmed, changed or cleared, with this program. Data which already exists can also be displayed for information.
The interface and link to a processing unit should be defined and the device-specific operating mode of the scales set.
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Entry range permitted: numeric
Default = 1
Entry range permitted: numeric 1 - 60
Default = 60 seconds
Enter a value in seconds to define the period in which the weighing operation has to be finalised.
Field with firmly defined selection options
Select one of the offered debug levels by clicking on the field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for the
debug level if a communications protocol is required for error analysis. The
details are shown in file "errlog" in directory work of the appropriate system unit.
Field with firmly defined selection options
Select one of the offered baud rates by clicking on this field and with a second click confirming the selection.
The system offers the following baud rates:
Please ensure that the baud rate set matches up with the setting of the connected scales type.
Entry range permitted: numeric
Default = 1000 milliseconds
Enter a value in milliseconds to define the intervals at which the scales have to respond to a status query. Scales offline appears from a negative acknowledgement.