The program description deals with the following:
The data for connection of a payment terminal type, TechLink V1.1, can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can be displayed for information.
The interface and link to a processing unit is defined here and the device-specific operating mode of the EFT terminals is set. Further settings are necessary, e. g. a payment type of category "In Addvance" and a process unit for the EFT Service.
Click onto the graphic for further help with the TechLink V1.1 Terminal.
The following description deals with all available options for update of this basic data.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the debug levels offered by clicking onto the field and then a second click onto the option required.
The system offers the following debug level:
Note:
Only select a value higher than "0" for
the debug level if a protocol of the communication with the payment terminal is
required for error analysis. The data appears in file "errlog" in
directory work of the appropriate system unit.
Default = 1
Not used.
Default = 1001
Notes:
The Portnumber of the Server terminal (IP-Address is always the address of the
system unit where EFT Device is configured to). Default: 1001. The IP-Address
must be configured in the EFT Device.
Default = 500
This value is the time in milliseconds until the request must be completed.
Default = 3000
This value is the time in milliseconds.
Default = 7000
This value is the time in milliseconds.
Default = 3
Default = 752 = SEK (Swedish krone)
Enter in this field ISO-Currency-Code of the home payment.
Default = 2
Enter in this field the numbers of decimal digits.
Default = 2
Default = 32