The program description deals with the following:
The data for connection of a drinks dispenser, type WMF4, can be updated, i.e. programmed, changed or cleared, with this program. Data which has already been stored can also be displayed for information.
The interface and link to a processing unit should be defined and the device-specific operating mode of the drinks dispenser set.
Drinks dispensers can be operated in two different modes: self-service and supervised dispensing.
Click
on the graphic for further help with programming Drink dispensers .
The following description deals with all available options for update of this basic data.
As with nearly all other programs the following also applies here:
Field with firmly defined selection options
Select one of the offered debug levels by clicking on this field and with a second click confirming the selection.
The system offers the following debug levels:
Note:
Only select a value higher than "0" for
the debug level if a protocol for communication of the drinks dispensers is
required for error analysis. The details are shown in file "errlog"
in directory work
of the appropriate system unit.
Field with firmly defined selection options
Select one of the offered baud rates by clicking on this field and with a second click confirming the selection.
The system offers the following baud rates:
Please ensure that the baud rate matches up with the setting for the connected drinks dispenser.
Default =1000
Default = 3000
Default = 1