ibcheckerrs - validate IB port (or node) and report errors in counters above threshold
ibcheckerrs [-h] [-b] [-v] [-G] [-T <threshold_file>] [-s(how_thresh- olds)] [-N | -nocolor] [-C ca_name] [-P ca_port] [-t(imeout) time- out_ms] <lid|guid> <port>
IBCHECKERRS(8) OpenIB Diagnostics IBCHECKERRS(8)
NAME
ibcheckerrs - validate IB port (or node) and report errors in counters
above threshold
SYNOPSIS
ibcheckerrs [-h] [-b] [-v] [-G] [-T <threshold_file>] [-s(how_thresh-
olds)] [-N | -nocolor] [-C ca_name] [-P ca_port] [-t(imeout) time-
out_ms] <lid|guid> <port>
DESCRIPTION
Check specified port (or node) and report errors that surpassed their
predefined threshold. Port address is lid unless -G option is used to
specify a GUID address. The predefined thresholds can be dumped using
the -s option, and a user defined threshold_file (using the same format
as the dump) can be specified using the -t <file> option.
OPTIONS
-G use GUID address argument. In most cases, it is the Port GUID.
Example:
"0x08f1040023"
-s show predefined thresholds
-T use specified threshold file
-v increase the verbosity level
-b brief mode. Reduce the output to show only if errors are
present, not what they are.
-N | -nocolor use mono rather than color mode
-C <ca_name> use the specified ca_name.
-P <ca_port> use the specified ca_port.
-t <timeout_ms> override the default timeout for the solicited mads.
EXAMPLE
ibcheckerrs 2 # check aggregated node counter for lid 2
ibcheckerrs 2 4 # check port counters for lid 2 port 4
ibcheckerrs -T xxx 2 # check node using xxx threshold file
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
+---------------+-----------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+-----------------------+
|Availability | network/open-fabrics |
+---------------+-----------------------+
|Stability | Pass-through volatile |
+---------------+-----------------------+
SEE ALSO
perfquery(8), ibaddr(8)
AUTHOR
Hal Rosenstock
<halr@voltaire.com>
NOTES
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from ['https://www.openfabrics.org/down-
loads/ibutils/ibutils-1.5.7-0.2.gbd7e502.tar.gz', 'https://www.openfab-
rics.org/downloads/libibverbs/libibverbs-1.1.8.tar.gz',
'https://www.openfabrics.org/downloads/libmlx4/libmlx4-1.0.6.tar.gz',
'https://www.openfabrics.org/downloads/libsdp/lib-
sdp-1.1.108-0.15.gd7fdb72.tar.gz', 'https://www.openfabrics.org/down-
loads/management/infiniband-diags-1.6.5.tar.gz', 'https://www.openfab-
rics.org/downloads/management/libibmad-1.3.12.tar.gz',
'https://www.openfabrics.org/downloads/management/libibu-
mad-1.3.10.2.tar.gz', 'https://www.openfabrics.org/downloads/manage-
ment/opensm-3.3.19.tar.gz', 'https://www.openfabrics.org/down-
loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz', 'https://www.open-
fabrics.org/downloads/qperf/qperf-0.4.9.tar.gz', 'https://www.openfab-
rics.org/downloads/rdmacm/librdmacm-1.0.21.tar.gz', 'https://www.open-
fabrics.org/downloads/rds-tools/rds-tools-2.0.4.tar.gz']
Further information about this software can be found on the open source
community website at http://www.openfabrics.org/.
OpenIB May 30, 2007 IBCHECKERRS(8)