sg_zone - send SCSI OPEN, CLOSE or FINISH ZONE command
sg_zone [--all] [--close] [--finish] [--help] [--open] [--verbose] [--version] [--zone=ID] DEVICE
SG_ZONE(8) SG3_UTILS SG_ZONE(8)
NAME
sg_zone - send SCSI OPEN, CLOSE or FINISH ZONE command
SYNOPSIS
sg_zone [--all] [--close] [--finish] [--help] [--open] [--verbose]
[--version] [--zone=ID] DEVICE
DESCRIPTION
Sends a SCSI OPEN ZONE, CLOSE ZONE or FINISH ZONE command to the
DEVICE. These commands are found in the ZBC draft standard revision 4c
(zbc-r04c.pdf).
One and only one of the --open, --close and --finish options can be
chosen.
OPTIONS
Arguments to long options are mandatory for short options as well.
-a, --all
sets the ALL field in the cdb.
-c, --close
causes the CLOSE ZONE command to be sent to the DEVICE.
-f, --finish
causes the FINISH ZONE command to be sent to the DEVICE.
-h, --help
output the usage message then exit.
-o, --open
causes the OPEN ZONE command to be sent to the DEVICE.
-v, --verbose
increase the level of verbosity, (i.e. debug output).
-V, --version
print the version string and then exit.
-z, --zone=ID
where ID is placed in the cdb's ZONE ID field. A zone id is a
zone start logical block address (LBA). The default value is 0.
ID is assumed to be in decimal unless prefixed with '0x' or has
a trailing 'h' which indicate hexadecimal.
EXIT STATUS
The exit status of sg_zone is 0 when it is successful. Otherwise see
the sg3_utils(8) man page.
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2014-2015 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO war-
ranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
+---------------+--------------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+--------------------------+
|Availability | system/storage/sg3_utils |
+---------------+--------------------------+
|Stability | Pass-through uncommitted |
+---------------+--------------------------+
SEE ALSO
sg_rep_zones,sg_reset_wp(sg3_utils)
NOTES
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from http://sg.danny.cz/sg/p/sg3_utils-1.42.tgz
Further information about this software can be found on the open source
community website at http://sg.danny.cz/sg/sg3_utils.html.
sg3_utils-1.42 November 2015 SG_ZONE(8)