smp_rep_manufacturer - tion
smp_rep_manufacturer [--help] [--hex] [--interface=PARAMS] [--raw] [--sa=SAS_ADDR] [--verbose] [--version] [--zero] SMP_DEVICE[,N]
SMP_REP_MANUFACTURER(8) SMP_UTILS SMP_REP_MANUFACTURER(8)
NAME
smp_rep_manufacturer - invoke REPORT MANUFACTURER INFORMATION SMP func-
tion
SYNOPSIS
smp_rep_manufacturer [--help] [--hex] [--interface=PARAMS] [--raw]
[--sa=SAS_ADDR] [--verbose] [--version] [--zero] SMP_DEVICE[,N]
DESCRIPTION
Sends a SAS Serial Management Protocol (SMP) REPORT MANUFACTURER INFOR-
MATION function request to an SMP target. The SMP target is identified
by the SMP_DEVICE and the SAS_ADDR. Depending on the interface, the
SAS_ADDR may be deduced from the SMP_DEVICE. The mpt interface uses
SMP_DEVICE to identify a HBA (an SMP initiator) and needs the addi-
tional ,N to differentiate between HBAs if there are multiple present.
OPTIONS
Mandatory arguments to long options are mandatory for short options as
well.
-h, --help
output the usage message then exit.
-H, --hex
output the response (less the CRC field) in hexadecimal.
-I, --interface=PARAMS
interface specific parameters. In this case "interface" refers
to the path through the operating system to the SMP initiator.
See the smp_utils man page for more information.
-r, --raw
send the response (less the CRC field) to stdout in binary. All
error messages are sent to stderr.
-s, --sa=SAS_ADDR
specifies the SAS address of the SMP target device. Typically
this is an expander. This option may not be needed if the
SMP_DEVICE has the target's SAS address within it. The SAS_ADDR
is in decimal but most SAS addresses are shown in hexadecimal.
To give a number in hexadecimal either prefix it with '0x' or
put a trailing 'h' on it.
-v, --verbose
increase the verbosity of the output. Can be used multiple times
-V, --version
print the version string and then exit.
-z, --zero
zero the Allocated Response Length field in the request. This is
required for strict SAS-1.1 compliance. However this option
should not be given in SAS-2 and later; if it is given an
abridged response may result.
CONFORMING TO
The SMP REPORT MANUFACTURER function was introduced in SAS-1, with
small additions in SAS-1.1 . This function remains unaltered in SAS-2
and SPL-1.
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2006-2011 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO war-
ranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
+---------------+--------------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+--------------------------+
|Availability | system/storage/smp_utils |
+---------------+--------------------------+
|Stability | Uncommitted |
+---------------+--------------------------+
SEE ALSO
smp_utils, smp_discover(smp_utils)
NOTES
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from http://sg.danny.cz/sg/p/smp_utils-0.98.tgz
Further information about this software can be found on the open source
community website at http://sg.danny.cz/sg/smp_utils.html.
smp_utils-0.96 May 2011 SMP_REP_MANUFACTURER(8)