FC 포트를 검색하려면 다음 CLI 명령을 사용합니다.
dory:configuration san fc targets> show
Properties:
targets = wwn.2100001B32811639,wwn.2101001B32A12239
Targets:
NAME MODE WWN PORT SPEED
target-000 target wwn.2100001B32811639 PCIe 5: Port 1 4 Gbit/s
target-001 initiator wwn.2101001B32A11639 PCIe 5: Port 2 0 Gbit/s
target-002 initiator wwn.2100001B32812239 PCIe 2: Port 1 0 Gbit/s
target-003 target wwn.2101001B32A12239 PCIe 2: Port 2 0 Gbit/s
dory:configuration san fc targets> select target-000
dory:configuration san fc targets target-000> show
Properties:
wwn = wwn.2100001B32811639
port = PCIe 5: Port 1
mode = target
speed = 4 Gbit/s
discovered_ports = 6
link_failure_count = 0
loss_of_sync_count = 0
loss_of_signal_count = 0
protocol_error_count = 0
invalid_tx_word_count = 0
invalid_crc_count = 0
Ports:
PORT WWN ALIAS MANUFACTURER
port-000 wwn.2100001B3281A339 longjaw-1 QLogic Corporation
port-001 wwn.2101001B32A1A339 longjaw-2 QLogic Corporation
port-002 wwn.2100001B3281AC39 thicktail-1 QLogic Corporation
port-003 wwn.2101001B32A1AC39 thicktail-2 QLogic Corporation
port-004 wwn.2100001B3281E339 <none> QLogic Corporation
port-005 wwn.2101001B32A1E339 <none> QLogic Corporation