This chapter describes how to return Oracle Database Appliance to operation after you have performed service procedures. It includes:
Returning Oracle Database Appliance X6-2 Series to Operation
Returning Oracle Database Appliance X3-2/X4-2/X5-2 to Operation
Powering On an Oracle Database Appliance That Includes a Storage Shelf
This section describes returning Oracle Database Appliance X6-2S/X6-2M/X6-2L or X6-2-HA to operation after servicing. If you have Oracle Database Appliance X3-2, Oracle Database Appliance X4-2, or Oracle Database Appliance X5-2, go to Returning Oracle Database Appliance X3-2/X4-2/X5-2 to Operation. If you have Oracle Database Appliance Version 1, go to Returning Oracle Database Appliance Version 1 to Operation.
Note:
Most of the links in the following table take you to instructions outside of the Oracle Database Appliance library to the Oracle Server X6-2 and Oracle Server X6-2L (including Storage Server X6-2 Extreme Flash version) documentation libraries. Use your browser's Back button to return to the Oracle Database Appliance library.Oracle Database Appliance X6-2S/X6-2M | Oracle Database Appliance X6-2L | Oracle Database Appliance X6-2-HA |
---|---|---|
This section describes returning Oracle Database Appliance X3-2, Oracle Database Appliance X4-2, or Oracle Database Appliance X5-2 to operation after servicing. If you have Oracle Database Appliance X6-2 series, go to Returning Oracle Database Appliance X6-2 Series to Operation. If you have Oracle Database Appliance Version 1, go to Returning Oracle Database Appliance Version 1 to Operation.
Note:
Most of the links in the following table take you to instructions outside of the Oracle Database Appliance library to the Sun Server X3-2, Sun Server X4-2 and Oracle Server X5-2 documentation libraries. Use your browser's Back button to return to the Oracle Database Appliance library.Oracle Database Appliance X3-2 | Oracle Database Appliance X4-2 | Oracle Database Appliance X5-2 |
---|---|---|
This section describes how to restore power after servicing an Oracle Database Appliance that includes at least one storage shelf (DE2-24P, DE2-24C, or DE3-24C). If you have an Oracle Database Appliance X6-2S/X6-2M/X6-2L or Oracle Database Appliance Version 1, your system does not support a storage shelf and you should skip this section.
If you haven't already, return the Oracle Database Appliance to operational status. If you have Oracle Database Appliance X6-2-HA, go to Returning Oracle Database Appliance X6-2 Series to Operation. If you have Oracle Database X3-2, Oracle Database Appliance X4-2, or Oracle Database Appliance X5-2, go to Returning Oracle Database Appliance X3-2/X4-2/X5-2 to Operation.
When powering on the system, each server node is powered on separately.
Perform the following procedure to power on the Oracle Database Appliance.
The disks begin to initialize and the power supply LEDs light green. This can take several minutes.
Note:
Do not power on the server nodes until the disks on the storage shelf and storage expansion shelf have initialized.Press the recessed Power button on the server node front panel.
Log in to the Oracle ILOM web interface, click Host Management > Power Control, and select Power On from the Select Action list box.
Log in to the Oracle ILOM command-line interface (CLI), and type the following command at the Oracle ILOM CLI prompt.
-> start /SYS
When the server is powered on and the power-on self-test (POST) code checkpoint tests have completed, the green Power/OK status indicator on the server node front panel lights and remains lit.
Note:
If you powered off both server nodes prior to servicing, repeat steps 3 and 4 to power on the second server node.Refer to the appropriate Deployment and User's Guide for the Oracle Database Appliance X6 series or the Administration and Reference Guide for the Oracle Database Appliance X3-2/X4-2/X5-2 or Version 1.
This section describes returning Oracle Database Appliance Version 1 to operation after servicing. If you have Oracle Database Appliance X6-2 series, go to Returning Oracle Database Appliance X6-2 Series to Operation. If you have Oracle Database Appliance X3-2, Oracle Database Appliance X4-2, or Oracle Database Appliance X5-2, go to Returning Oracle Database Appliance X3-2/X4-2/X5-2 to Operation.