Reinstall the Storage Server in the Rack
After servicing the system, reinstall it into the rack.
 | Caution - Deploy any rack anti-tilt mechanism before installing the storage server into the rack. |
| Caution - The storage server weighs approximately 63 pounds (28.5 kg). Two people are required to carry the chassis and install it in the rack. |
-
Lift the storage server from the antistatic mat, and reinstall the storage server into
the rack.
Refer to Installing the Storage Server Into a Rack in Oracle Exadata Storage Server X6-2 Extreme Flash Installation Guide for the installation instructions specific to your rackmount kit.
-
If the cable management arm (CMA) is not installed, that is, you removed it
because you removed the storage server completely out of the rack, install the
CMA.
For installation instructions for the CMA, refer to Install the Cable Management Arm in Oracle Exadata Storage Server X6-2 Extreme Flash Installation Guide.
-
If the cables are disconnected from the rear of the storage server, that is, you
disconnected the cables because you removed the storage server completely out of the
rack, reconnect the cables.
- For instructions on reconnecting cables to the rear of the storage server, see Reconnect Power and Data Cables.
- For detailed information on connecting cables to the rear of the storage server, see Rear Panel Connector Locations.