Printing Additional Pick Labels (PAPL)

Purpose: Use Print Additional Pick Labels to print extra pick control labels for a specific pick control number. The system uses the print program name defined in the Pick Label Print Program (F28) system control value to determine the format of the pick control labels. The base pick label print program names are:

• PICKLBL if you print labels on a standard printer. With this setting, the label includes the ship-to name and address, and a print file is available at the Forms Management screen.

• RFPRINT if you print labels on a Zebra printer. With this setting, the label prints immediately, and does not include the ship-to name and address. You also need to complete the setup described under the Addl Pick Label Printer ID (L66) system control value.

In order to print extra pick control labels:

• The Pick Label Print Program (F28) system control value must contain a print program name. An error message indicates if the system control value is blank: Valid value required in SCV F28.

• If the Pick Label Print Program (F28) system control value is set to RFPRINT, the Addl Pick Label Printer ID (L66) must specify a valid printer, and you must also complete the properties file setup described under that system control value.

• The # of Pick Control Labels (D47) system control value must contain a value greater than or equal to 1.

• The selected pick control number must be in a Manifest Submission status.

• You must be using a PC manifesting station that supports multiple label tracking.

Note: You can also print additional labels through the Working with Pick/Pack Verification (WPPV) menu option.

For more information: On PC manifesting, see PC Manifesting Interface.

Print Additional Pick Labels Screen

Purpose: Use this screen to select the pick control number and specify the amount of extra labels to print.

How to display this screen: Enter PAPL in the Fast path field at the top of any menu or select Print Additional Pick Labels from a menu.

Field	Description
Pick control #	The control number assigned to the pick slip for which you wish to print extra labels. An error message similar to the following indicates if you enter an invalid number: Pick control # 1495 is invalid. An error message similar to the following indicates if you enter a pick control number that is not in a Manifest Submission status: Invalid Pick Status for Pick Control # 1469. Numeric, 7 positions; required.
Number of addl labels (Number of additional labels)	The number of extra labels to print. An error message similar to the following indicates if you do not enter a number in this field: # of Labels must be GE 1. The maximum number of pick control labels that you can print for a specific pick control number is 99. The system adds the amount of pick control labels already printed to the number you enter in this field. An error message similar to the following indicates if you enter an amount that will exceed 99 labels: Existing labels 48 with Add'l Labels 56 exceeds 99. Numeric, 3 positions; required.

When you complete this screen to print additional pick control labels, the system:

• generates the PDF file if the Pick Label Print Program (F28) system control value is set to PICKLBL, or sends the label to the Zebra printer if the Pick Label Print Program (F28) is set to RFPRINT.

• updates the Labels field in the Pick Control Header table.

• creates a PC Manifest Download record in the PC Manifest Download New file (FLMNDL).

• creates a record in the Pick Control Label table.