There are a number of steps involved in creating a logical standby database, including prerequisites and post-creation tasks.
Oracle Database Administrator's Guide for information about creating and using server parameter files
Oracle Enterprise Manager Cloud Control online help system for information about using the Oracle Data Guard broker graphical user interface (GUI) to automatically create a logical standby database.
If you are working in a multitenant container database (CDB) environment, then see Creating a Logical Standby of a CDB for information about behavioral differences from non-CDB environments. For instance, in a CDB environment, many DBA views have analogous CDB views that you should use instead. For example, the view
CDB_LOGSTDBY_NOT_UNIQUE contains the same data as shown in
DBA_LOGSTDBY_NOT_UNIQUE view, but it has an additional column indicating the PDB name.
4.1 Prerequisite Conditions for Creating a Logical Standby Database
Before you create a logical standby database, you must first ensure the primary database is properly configured.
Perform the following tasks on the primary database to prepare for logical standby database creation:
A logical standby database uses standby redo logs (SRLs) for redo received from the primary database, and also writes to online redo logs (ORLs) as it applies changes to the standby database. Thus, logical standby databases often require additional
ARCn processes to simultaneously archive SRLs and ORLs. Additionally, because archiving of ORLs takes precedence over archiving of SRLs, a greater number of SRLs may be needed on a logical standby during periods of very high workload.
Note:Logical standby databases must be run in
ARCHIVELOGmode for standby redo log archival to be performed.
See Oracle Database Administrator's Guide for information about archiving.
4.1.1 Determine Support for Data Types and Storage Attributes for Tables
Before setting up a logical standby database, ensure the logical standby database can maintain the data types and tables in your primary database.
See Unsupported Tables for information about specific SQL queries you can use to determine if there are any unsupported data types or storage attributes.
4.1.2 Ensure Table Rows in the Primary Database Can Be Uniquely Identified
The ROWIDs contained in the redo records generated by the primary database cannot be used to identify the corresponding row in the logical standby database.
This is because the physical organization in a logical standby database is different from that of the primary database, even though the logical standby database is created from a backup copy of the primary database.
Oracle uses primary-key or unique-constraint/index supplemental logging to logically identify a modified row in the logical standby database. When database-wide primary-key and unique-constraint/index supplemental logging is enabled, each
UPDATE statement also writes the column values necessary in the redo log to uniquely identify the modified row in the logical standby database.
If a table has a primary key defined, then the primary key is logged along with the modified columns as part of the
UPDATEstatement to identify the modified row.
In the absence of a primary key, the shortest nonnull unique-constraint/index is logged along with the modified columns as part of the
UPDATEstatement to identify the modified row.
If there is no primary key and no nonnull unique constraint/index, then all columns with a declared maximum length of 4000 bytes are logged as part of the
UPDATEstatement to help identify the modified row. There are some requirements and restrictions with respect to supported data types. See the following sections for more information:
A function-based index, even though it is declared as unique, cannot be used to uniquely identify a modified row. However, logical standby databases support replication of tables that have function-based indexes defined, as long as modified rows can be uniquely identified.
Oracle recommends that you add a primary key or a nonnull unique index to tables in the primary database, whenever possible, to ensure that SQL Apply can efficiently apply redo data updates to the logical standby database.
Perform the following steps to ensure SQL Apply can uniquely identify rows of each table being replicated in the logical standby database.
- Query the
DBA_LOGSTDBY_NOT_UNIQUEview to display a list of tables that SQL Apply may not be able to uniquely identify. For example:
SQL> SELECT OWNER, TABLE_NAME FROM DBA_LOGSTDBY_NOT_UNIQUE 2> WHERE (OWNER, TABLE_NAME) NOT IN 3> (SELECT DISTINCT OWNER, TABLE_NAME FROM DBA_LOGSTDBY_UNSUPPORTED) 4> AND BAD_COLUMN = 'Y';
This query may take a few minutes to run.
- If your application ensures the rows in a table are unique, then you can create a disabled primary key
RELYconstraint on the table. This avoids the overhead of maintaining a primary key on the primary database.
To create a disabled
RELY constraint on a primary database table, use the
ALTER TABLE statement with a
RELY DISABLE clause. The following example creates a disabled
RELY constraint on a table named
mytab, for which rows can be uniquely identified using the
SQL> ALTER TABLE mytab ADD PRIMARY KEY (id, name) RELY DISABLE;
When you specify the
RELY constraint, the system assumes that rows are unique. Because you are telling the system to rely on the information, but are not validating it on every modification done to the table, you must be careful to select columns for the disabled
RELY constraint that uniquely identify each row in the table. If such uniqueness is not present, then SQL Apply does not correctly maintain the table.
To improve the performance of SQL Apply, add a unique-constraint/index to the columns to identify the row on the logical standby database. Failure to do so results in full table scans during
DELETE statements carried out on the table by SQL Apply.
Oracle Database Reference for information about the
Oracle Database SQL Language Reference for information about the
ALTER TABLEstatement syntax
Create a Primary Key RELY Constraint for information about
RELYconstraints and actions you can take to increase performance on a logical standby database
4.2 Step-by-Step Instructions for Creating a Logical Standby Database
These are the tasks you perform to create a logical standby database.
Table 4-1 Creating a Logical Standby Database
4.2.1 Creating a Logical Standby Task 1: Create a Physical Standby Database
You create a logical standby database by first creating a physical standby database and then transitioning it to a logical standby database.
Follow the instructions in Creating a Physical Standby Database to create a physical standby database.
4.2.2 Creating a Logical Standby Task 2: Stop Redo Apply on the Physical Standby Database
You can run Redo Apply on the new physical standby database for any length of time before converting it to a logical standby database.
However, before converting to a logical standby database, stop Redo Apply on the physical standby database. Stopping Redo Apply is necessary to avoid applying changes past the redo that contains the LogMiner dictionary (described in Build a Dictionary in the Redo Data).
To stop Redo Apply, issue the following statement on the physical standby database:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
4.2.3 Creating a Logical Standby Task 3: Prepare the Primary Database to Support a Logical Standby Database
As part of creating a logical standby database, you must prepare the primary database to support a logical standby.
See the following topics:
22.214.171.124 Prepare the Primary Database for Role Transitions
You may have to modify certain parameters when you prepare to switch the role of a primary database.
In Set Primary Database Initialization Parameters, you set up several standby role initialization parameters to take effect when the primary database is transitioned to the physical standby role.
This step is necessary only if you plan to perform switchovers.
If you plan to transition the primary database to the logical standby role, then you must also modify the parameters shown in bold typeface in Example 4-1, so that no parameters need to change after a role transition:
VALID_FORattribute in the original
LOG_ARCHIVE_DEST_1destination to archive redo data only from the online redo log and not from the standby redo log.
LOG_ARCHIVE_DEST_3destination on the primary database. This parameter only takes effect when the primary database is transitioned to the logical standby role.
The following table describes the archival processing defined by the changed initialization parameters shown in Example 4-1.
|LOG_ARCHIVE_DEST_n||When the Chicago Database Is Running in the Primary Role||When the Chicago Database Is Running in the Logical Standby Role|
Directs archiving of redo data generated by the primary database from the local online redo log files to the local archived redo log files in
Directs archiving of redo data generated by the logical standby database from the local online redo log files to the local archived redo log files in
Directs archiving of redo data from the standby redo log files to the local archived redo log files in
Example 4-1 Primary Database: Logical Standby Role Initialization Parameters
LOG_ARCHIVE_DEST_1= 'LOCATION=/arch1/chicago/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=chicago' LOG_ARCHIVE_DEST_3= 'LOCATION=/arch2/chicago/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=chicago' LOG_ARCHIVE_DEST_STATE_3=ENABLE
To dynamically set these initialization parameters, use the SQL
ALTER SYSTEM SET statement and include the
SCOPE=BOTH clause so that the changes take effect immediately and persist after the database is shut down and started up again.
126.96.36.199 Build a Dictionary in the Redo Data
A LogMiner dictionary must be built into the redo data so that the LogMiner component of SQL Apply can properly interpret changes it sees in the redo.
As part of building the LogMiner dictionary, supplemental logging is automatically set up to log primary key and unique-constraint/index columns. The supplemental logging information ensures each update contains enough information to logically identify each row that is modified by the statement.
To build the LogMiner dictionary, issue the following statement:
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
DBMS_LOGSTDBY.BUILD procedure waits for all existing transactions to complete. Long-running transactions executed on the primary database affect the timeliness of this command.
In databases created using Oracle Database 11g Release 2 (11.2) or later, supplemental logging information is automatically propagated to any existing physical standby databases. However, for databases in earlier releases, or if the database was created using an earlier release and then upgraded to 11.2, you must check whether supplemental logging is enabled at the physical standby(s) if it is also enabled at the primary database. If it is not enabled at the physical standby(s), then before performing a switchover or failover, you must enable supplemental logging on all existing physical standby databases. To do so, issue the following SQL statement on each physical standby:
SQL> ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (PRIMARY KEY, UNIQUE INDEX) COLUMNS;
If you do not do this, then any logical standby that is also in the same Oracle Data Guard configuration is unusable if a switchover or failover is performed to one of the physical standby databases. If a switchover or failover has already occurred and supplemental logging was not enabled, then you must recreate all logical standby databases.
DBMS_LOGSTDBY.BUILDPL/SQL package in Oracle Database PL/SQL Packages and Types Reference
UNDO_RETENTIONinitialization parameter in Oracle Database Reference
4.2.4 Creating a Logical Standby Task 4: Transition to a Logical Standby Database
There are some necessary tasks you must perform to prepare the physical standby database to transition to a logical standby database.
The following topics describe these tasks:
188.8.131.52 Convert to a Logical Standby Database
The redo logs contain the information necessary to convert your physical standby database to a logical standby database.
If you have an Oracle RAC physical standby database, then shut down all but one instance, set
FALSE, and start the standby database as a single instance in
MOUNT EXCLUSIVE mode, as follows:
SQL> ALTER SYSTEM SET CLUSTER_DATABASE=FALSE SCOPE=SPFILE; SQL> SHUTDOWN ABORT; SQL> STARTUP MOUNT EXCLUSIVE;
To continue applying redo data to the physical standby database until it is ready to convert to a logical standby database, issue the following SQL statement:
For db_name, specify a database name that is different from the primary database to identify the new logical standby database. If you are using a server parameter file (spfile) at the time you issue this statement, then the database updates the file with appropriate information about the new logical standby database. If you are not using an spfile, then the database issues a message reminding you to set the name of the
DB_NAME parameter after shutting down the database.
SQL> ALTER DATABASE RECOVER TO LOGICAL STANDBY KEEP IDENTITY;
A logical standby database created with the
KEEP IDENTITY clause retains the same
DBID as that of its primary database. Such a logical standby database can only participate in one switchover operation, and thus should only be created in the context of a rolling upgrade with a physical standby database.
KEEP IDENTITY clause is available only if the database being upgraded is running Oracle Database release 11.1 or later.
The statement waits, applying redo data until the LogMiner dictionary is found in the log files. This may take several minutes, depending on how long it takes redo generated in Build a Dictionary in the Redo Data to be transmitted to the standby database, and how much redo data needs to be applied. If a dictionary build is not successfully performed on the primary database, then this command never completes. You can cancel the SQL statement by issuing the
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL statement from another SQL session.
In releases prior to Oracle Database 11g, you needed to create a new password file before you opened the logical standby database. This is no longer needed. Creating a new password file at the logical standby database causes redo transport services to not work properly.
184.108.40.206 Adjust Initialization Parameters for the Logical Standby Database
If you started with an Oracle RAC physical standby database, then set
CLUSTER_DATABASE back to
TRUE, as follows:
SQL> ALTER SYSTEM SET CLUSTER_DATABASE=TRUE SCOPE=SPFILE;
On the logical standby database, shutdown the instance and issue the
STARTUP MOUNT statement to start and mount the database. Do not open the database; it should remain closed to user access until later in the creation process. For example:
SQL> SHUTDOWN; SQL> STARTUP MOUNT;
You need to modify the
n parameters because, unlike physical standby databases, logical standby databases are open databases that generate redo data and have multiple log files (online redo log files, archived redo log files, and standby redo log files). It is good practice to specify separate local destinations for:
Archived redo log files that store redo data generated by the logical standby database. In Example 4-2, this is configured as the
Archived redo log files that store redo data received from the primary database. In Example 4-2, this is configured as the
Example 4-2 shows the initialization parameters that were modified for the logical standby database. The parameters shown are valid for the Boston logical standby database when it is running in either the primary or standby database role.
If database compatibility is set to 11.1 or later, you can use the fast recovery area to store remote archived logs. To do this, you need to set only the following parameters (assuming you have already set the
LOG_ARCHIVE_DEST_1= 'LOCATION=USE_DB_RECOVERY_FILE_DEST DB_UNIQUE_NAME=boston'
Because you are using the fast recovery area, it is not necessary to specify the
VALID_FOR parameter. Its default value is (
ALL_LOGFILES,ALL_ROLES) and that is the desired behavior in this case.
LOG_ARCHIVE_DEST_1 is used for all log files, both online (primary) and standby.
The following table describes the archival processing defined by the initialization parameters shown in Example 4-2.
|LOG_ARCHIVE_DEST_n||When the Boston Database Is Running in the Primary Role||When the Boston Database Is Running in the Logical Standby Role|
Directs archival of redo data generated by the primary database from the local online redo log files to the local archived redo log files in
Directs archival of redo data generated by the logical standby database from the local online redo log files to the local archived redo log files in
Directs transmission of redo data to the remote logical standby database
Directs archival of redo data received from the primary database to the local archived redo log files in
DB_FILE_NAME_CONVERT initialization parameter is not honored once a physical standby database is converted to a logical standby database. If necessary, register a skip handler and provide SQL Apply with a replacement DDL string to execute by converting the path names of the primary database data files to the standby data file path names. See the
DBMS_LOGSTDBY package for information about the
Example 4-2 Modifying Initialization Parameters for a Logical Standby Database
LOG_ARCHIVE_DEST_1= 'LOCATION=/arch1/boston/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=boston' LOG_ARCHIVE_DEST_2= 'SERVICE=chicago ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=chicago' LOG_ARCHIVE_DEST_3= 'LOCATION=/arch2/boston/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=boston' LOG_ARCHIVE_DEST_STATE_1=ENABLE LOG_ARCHIVE_DEST_STATE_2=ENABLE LOG_ARCHIVE_DEST_STATE_3=ENABLE
4.2.5 Creating a Logical Standby Task 5: Open the Logical Standby Database
ALTER DATABASE SQL statement to open the newly created logical standby.
For example, issue the following statement (do not supply the
RESETLOGS option if the logical standby was created using the
SQL> ALTER DATABASE OPEN RESETLOGS;
If you started with an Oracle RAC physical standby database, then you can start up all other standby instances at this point.
If you are co-locating the logical standby database on the same computer system as the primary database, then you must issue the following SQL statement before starting SQL Apply for the first time, so that SQL Apply skips the file operations performed at the primary database. The reason this is necessary is that SQL Apply has access to the same directory structure as the primary database, and data files that belong to the primary database could possibly be damaged if SQL Apply attempted to re-execute certain file-specific operations.
SQL> EXECUTE DBMS_LOGSTDBY.SKIP('ALTER TABLESPACE');
DB_FILENAME_CONVERT parameter that you set up while co-locating the physical standby database on the same system as the primary database, is ignored by SQL Apply. See Oracle Database PL/SQL Packages and Types Reference for information about
DBMS_LOGSTDBY.SKIP and equivalent behavior in the context of a logical standby database.
Because this is the first time the database is being opened, the database's global name is adjusted automatically to match the new
DB_NAME initialization parameter. (This is not true if the logical standby was created using the
If you are creating the logical standby database to perform a rolling upgrade of the Oracle Database software, and you are concerned about updates to objects that may not be supported by SQL Apply, then Oracle recommends that you use the
DBMS_LOGSTDBY PL/SQL procedure. At the logical standby database, run the following procedures to capture and record the information as events in the
EXEC DBMS_LOGSTDBY.APPLY_SET('MAX_EVENTS_RECORDED', DBMS_LOGSTDBY.MAX_EVENTS); EXEC DBMS_LOGSTDBY.APPLY_SET('RECORD_UNSUPPORTED_OPERATIONS', 'TRUE');
This captures information about any transactions running on the primary that are not supported by logical standby. When the upgrade is complete and before you switch production to the new version, check this table. If nothing is recorded, then you know everything was replicated. If something is recorded, then you can choose to either take corrective action or abandon the upgrade.
Customizing Logging of Events in the DBA_LOGSTDBY_EVENTS View for more information about the
Oracle Database PL/SQL Packages and Types Reference for complete information about the
4.3 Creating a Logical Standby: Post-Creation Steps
The conversion of the physical standby database to a logical standby database happens in two phases:
As part of the
ALTER DATABASE RECOVER TO LOGICAL STANDBYstatement (unless you have specified the
KEEP IDENTITYclause), the DBID of the database is changed.
As part of the first successful invocation of
ALTER DATABASE START LOGICAL STANDBY APPLYstatement, the control file is updated to make it consistent with that of the newly created logical standby database.
After you have successfully invoked the
ALTER DATABASE START LOGICAL STANDBY APPLYstatement, take a full backup of the logical standby database, because the backups taken from the primary database cannot be used to restore the logical standby database.
At this point, the logical standby database is running and can provide the maximum performance level of data protection. The following list describes additional preparations you can take on the logical standby database:
Upgrade the data protection mode
The Oracle Data Guard configuration is initially set up in the maximum performance mode (the default).
Enable Flashback Database
Flashback Database removes the need to re-create the primary database after a failover. Flashback Database enables you to return a database to its state at a time in the recent past much faster than traditional point-in-time recovery, because it does not require restoring data files from backup nor the extensive application of redo data. You can enable Flashback Database on the primary database, the standby database, or both.
Converting a Failed Primary Into a Standby Database Using Flashback Database and Using Flashback Database After Issuing an Open Resetlogs Statement for scenarios showing how to use Flashback Database in an Oracle Data Guard environment.
Oracle Database Backup and Recovery User's Guide for more information about Flashback Database
4.4 Creating a Logical Standby of a CDB
You can create a logical standby of a multitenant container database (CDB) just as you can create a logical standby of a regular primary database.
The following are some of the behavioral differences to be aware of when you create and use a logical standby of a CDB:
The database role is defined at the CDB level, not at the pluggable database (PDB) container level.
If you execute a switchover or failover operation, then the entire CDB undergoes the role change.
Any DDL related to role changes must be executed while connected to the root container of the CDB.
As with a regular logical standby, a logical standby of a CDB operates a single pool of processes that mine the redo stream once, but the responsibility is shared for updating all of the PDBs and the root container of the CDB.
You are not required to have the same set of PDBs at the primary and standby. However, only tables that exist in the same container at both the primary and standby are replicated.
In general, logical standby PL/SQL interfaces which modify global configuration attributes, such as
DBMS_LOGSTDBY.APPLY_SET, are executed in the root container. However,
DBMS_LOGSTDBY.INSTANTIATE_TABLEmust be called inside the container where the table of interest resides, and the
DBMS_LOGSTDBY.SKIPprocedure must be called inside the container of interest.
Logical standby views are enhanced to provide container names where appropriate. Many DBA views have analogous CDB views whose names begin with CDB. For example, the view
CDB_LOGSTDBY_NOT_UNIQUEcontains the same data as shown in
DBA_LOGSTDBY_NOT_UNIQUEview, but it has an additional column indicating the PDB name. When the
CDB_LOGSTDBY_NOT_UNIQUEview is queried in the root it shows data for all databases in the CDB.
In a logical standby of a CDB, the syntax of SQL statements is generally the same as for noncontainer databases. However, the effect of some statements, including the following, may be different:
ALTER DATABASE RECOVER TO LOGICAL STANDBYfunctions only in the CDB; it is not allowed in a PDB.
A role is associated with an entire CDB; individual PDBs do not have their own roles. Therefore, the following role change DDL associated with logical standbys affect the entire CDB:
ALTER DATABASE [PREPARE|COMMIT] TO SWITCHOVER
ALTER DATABASE ACTIVATE LOGICAL STANDBY
ALTER DATABASE [START|STOP] LOGICAL STANDBY APPLYfunctions only in the root container and affects the entire CDB. This statement is not allowed on a PDB.
ALTER DATABASE GUARDfunctions only in the root container and affects the entire CDB. For example, if an
ALTER DATABASE GUARD ALLstatement is issued, then user activity in the root and in all PDBs is restricted.
To administer a multitenant environment, you must have the
Oracle Database Concepts for more information about CDBs
Oracle Database PL/SQL Packages and Types Reference for more information about using the
DBMS_LOGSTDBY.SKIPprocedure in containers