6 Returning Oracle Database Appliance to Operation
Perform tasks to return the Oracle Database Appliance to operation after service.
Remove Antistatic Measures
- Remove any antistatic straps or conductors from the server chassis.
Parent topic: Returning Oracle Database Appliance to Operation
Reinstall the Server Into the Rack
Use this procedure to install the server chassis with mounting brackets into the slide-rail assemblies that are mounted to the rack.
Caution:
Personal Injury or Equipment Damage: This procedure requires a minimum of two people because of the weight of the server. Attempting this procedure alone could result in equipment damage or personal injury.
Always load equipment into a rack from the bottom up so that the rack does not become top-heavy and tip over. Extend the rack anti-tilt bar to prevent the rack from tipping during equipment installation.
Parent topic: Returning Oracle Database Appliance to Operation
Return the Server to the Normal Rack Position
If the server is in the extended maintenance position, use this procedure to return the server to the normal rack position.
-
Push the server back into the rack, as described in the following steps.
- Do one of the following:
- If you previously removed the CMA, proceed to the next section to reinstall it. See Install the Cable Management Arm (Optional).
- If you did not remove or purchase the optional cable management arm, retract the rack anti-tilt mechanism back to its normal position.
Parent topic: Returning Oracle Database Appliance to Operation
Install the Cable Management Arm (Optional)
Follow this procedure to install the cable management arm (CMA), which you can use to manage cables connected to the back of the server.
Note:
Before you install the CMA, ensure that the right-angle AC power cables are long enough to connect to the rackmounted servers when routed through the CMA.
Parent topic: Returning Oracle Database Appliance to Operation
Powering On Oracle Database Appliance
- If your system includes a storage shelf, perform the following actions:
- If you powered off a server, performing the following actions:
Parent topic: Returning Oracle Database Appliance to Operation