4.10 act-lg-card

Use this command to activate LG event generation/reception on a given LG card

The command class is TKLC_INTERNAL inheriting properties of DEBUG class. The Load Generator is supported on IPSG, IPLHC, IPGHC and SS7HC GPLs.

Parameters

loc (mandatory)
The card location as stenciled on the shelf of the system.
Range:
1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
dir (optional)

The direction in which the event generation or reception is to be activated.

Range:
Rx
 Receive Direction
Tx
 Transmit Direction
All
Both in Tx and Rx directions
Default:
All

Example

act-lg-card:loc=1302

act-lg-card:loc=1302:dir=tx

act-lg-card:loc=1302:dir=rx

Dependencies

The card location must not be 1113-1118, xy09, or xy10 where x is the frame and y is the shelf.

The LG Card table is corrupt or cannot be found.

The card location specified in the loc parameter must be of a provisioned LG card.

Loc is mandatory

Activating the state of an LG object that is already activated or deactivating the state of an LG object that is already deactivated has no effect.

Output

None.