4.319 ent-lg-card

Use this command to create a new LG card. An LG Card is associated with a single LG Group. The command class is TKLC_INTERNAL inheriting properties of DEBUG class. The Load Generator is supported on IPSG, IPLHC, IPGHC and SS7HC GPLs.

Parameters

grp (mandatory)
LG group name 
Range:
ayyyyyyyyy Up to 10 alphanumeric characters; the first character must be a letter.
loc (mandatory)
The card location as stenciled on the shelf of the system.
Range:
1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

Example

ent-lg-card:loc=1301:grp=lggroup1

Dependencies

The card location must not be 1113-1118, or xy09 and xy10 where x is the frame and y is the shelf.

The valid card types are DCM, ENET, LIME1, and LIMT1.

The specified group name value must exist in the database.

The card location specified in the loc parameter must not be associated with another LG group.

The LG Card table is corrupt or cannot be found.

The card in the specified card location must be a LIM and must exist.

The card location specified in the loc parameter must be equipped.

The LG Group table is corrupt or cannot be found.

The loc and grp parameters are mandatory

The IMT table is corrupt or cannot be found.

Only E-5 Class cards are supported card types for a card to be an LG card

Output